Skip to content

Inspur-Data/ib-sriov-cni

BranchesTags
 
 

Repository files navigation

License Go Report Card Build Status Coverage Status

InfiniBand SR-IOV CNI plugin

NIC with SR-IOV capabilities work by introducing the idea of physical functions (PFs) and virtual functions (VFs).

A PF is used by host and VF configurations are applied through the PF. Each VF can be treated as a separate physical NIC and assigned to one container.

Build

To build the plugin binary:

# make

Upon successful build the plugin binary will be available in build/ib-sriov.

Enable SR-IOV

IB-SRIOV-CNI support Mellanox ConnectX®-4/ConnectX®-5/ConnectX®-6 adapter cards.

Using Upstream Mstflint

To enable SR-IOV functionality using upstream mstflint, the following steps are required:

Install Mstflint package.

# yum install -y mstflint

Enable SR-IOV

# lspci | grep Mellanox
02:00.0 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]
02:00.1 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]

# mstconfig -d 0000:02:00.0 set SRIOV_EN=1 NUM_OF_VFS=8

Device #1:
----------

Device type:    ConnectX5       
Name:           MCX556A-ECA_Ax  
Description:    ConnectX-5 VPI adapter card; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe3.0 x16; tall bracket; ROHS R6
Device:         0000:02:00.0    

Configurations:                              Next Boot       New
         SRIOV_EN                            False(0)       True(1)         
         NUM_OF_VFS                          0              8               

 Apply new Configuration? (y/n) [n] : y
Applying... Done!
-I- Please reboot machine to load new configurations.

Reboot the machine

# reboot

Create SR-IOV VFs

# echo 4 > /sys/class/net/ib0/device/sriov_numvfs

# lspci | grep Mellanox
02:00.0 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]
02:00.1 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]
02:00.2 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.3 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.4 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.5 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]

# ip link show
...
ib2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband c6:6d:7d:dd:2a:d5 brd ff:ff:ff:ff:ff:ff
ib3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband 42:3e:07:68:da:fb brd ff:ff:ff:ff:ff:ff
ib4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband 42:68:f2:aa:c2:27 brd ff:ff:ff:ff:ff:ff
ib5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...

To change the number of VFs reset the number to 0 then set the needed number

echo 0 > /sys/class/net/ib0/device/sriov_numvfs
echo 8 > /sys/class/net/ib0/device/sriov_numvfs

Using Mellanox OFED

To enable SR-IOV functionality using Mellnaox's OFED, the following steps are required:

1- Enable SR-IOV in the NIC's Firmware.

Installing Mellanox Management Tools (MFT) or mstflint is a pre-requisite, MFT can be downloaded from here, mstflint package available in the various distros and can be downloaded from here.

Use Mellanox Firmware Tools package to enable and configure SR-IOV in firmware

# mst start
Starting MST (Mellanox Software Tools) driver set
Loading MST PCI module - Success
Loading MST PCI configuration module - Success
Create devices

Locate the HCA device on the desired PCI slot

# mst status
MST modules:
------------
    MST PCI module loaded
    MST PCI configuration module loaded
MST devices:
------------
/dev/mst/mt4115_pciconf0         - PCI configuration cycles access.
...

Enable SR-IOV

# mlxconfig -d /dev/mst/mt4115_pciconf0 set SRIOV_EN=1 NUM_OF_VFS=8
...
Apply new Configuration? ? (y/n) [n] : y
Applying... Done!
-I- Please reboot machine to load new configurations.

Reboot the machine

# reboot

2- Enable SR-IOV in the NIC's Driver.

# ibdev2netdev
mlx5_0 port 1 ==> ib0 (Up)
mlx5_1 port 1 ==> ib1 (Down)

# echo 4 > /sys/class/net/ib0/device/sriov_numvfs
# ibdev2netdev -v
0000:02:00.0 mlx5_0 (MT4115 - MT1523X04353) CX456A - ConnectX-4 QSFP fw 12.23.1020 port 1 (ACTIVE) ==> ib0 (Up)
0000:02:00.1 mlx5_1 (MT4115 - MT1523X04353) CX456A - ConnectX-4 QSFP fw 12.23.1020 port 1 (ACTIVE) ==> ib1 (Down)
0000:02:00.5 mlx5_2 (MT4116 - NA)  fw 12.23.1020 port 1 (DOWN  ) ==> ib2 (Down)
0000:02:00.6 mlx5_3 (MT4116 - NA)  fw 12.23.1020 port 1 (DOWN  ) ==> ib3 (Down)
0000:02:00.7 mlx5_4 (MT4116 - NA)  fw 12.23.1020 port 1 (DOWN  ) ==> ib4 (Down)
0000:02:00.2 mlx5_5 (MT4116 - NA)  fw 12.23.1020 port 1 (DOWN  ) ==> ib5 (Down)

# lspci | grep Mellanox
02:00.0 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]
02:00.1 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4]
02:00.2 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.3 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.4 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]
02:00.5 Infiniband controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]

# ip link show
...
ib2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband c6:6d:7d:dd:2a:d5 brd ff:ff:ff:ff:ff:ff
ib3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband 42:3e:07:68:da:fb brd ff:ff:ff:ff:ff:ff
ib4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/infiniband 42:68:f2:aa:c2:27 brd ff:ff:ff:ff:ff:ff
ib5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...

To change the number of VFs reset the number to 0 then set the needed number

echo 0 > /sys/class/net/ib0/device/sriov_numvfs
echo 8 > /sys/class/net/ib0/device/sriov_numvfs

Configuration reference

  • name (string, required): the name of the network
  • type (string, required): "ib-sriov"
  • deviceID (string, required): A valid pci address of an InfiniBand SR-IOV NIC's VF. e.g. "0000:03:02.3"
  • guid (string, optional): InfiniBand Guid for VF.
  • pkey (string, optional): InfiniBand pkey for VF, this field is used by ib-kubernetes to add pkey with guid to InfiniBand subnet manager client e.g. Mellanox UFM, OpenSM.
  • ipam (dictionary, optional): IPAM configuration to be used for this network, dhcp is not supported.
  • link_state (string, optional): Enforces link state for the VF. Allowed values: auto, enable, disable.
  • rdmaIsolation (boolean, optional): Enable RDMA network namespace isolation for RDMA workloads. More information about the system requirements to support this mode of operation can be found here
  • ibKubernetesEnabled (bool, optional): Enforces ib-sriov-cni to work with ib-kubernetes.

Note: If rdmaIsolation is set to true, rdma-cni should not be used.

Supported Capabilities / Runtime configurations

ib-sriov supports the following CNI's Capabilities / Runtime Configuration:

  • infinibandGUID (string): Dynamically assign Infiniband GUID to network interface (VF).

Usage

# cat > /etc/cni/net.d/10-ib-sriov.conf <<EOF
{
    "cniVersion": "0.3.1",
    "name": "mynet",
    "type": "ib-sriov",
    "deviceID": "0000:03:02.0",
    "link_state": "enable",
    "rdmaIsolation": true,
    "ibKubernetesEnabled": false,
    "ipam": {
                "type": "host-local",
                "subnet": "10.56.217.0/24",
                "rangeStart": "10.56.217.171",
                "rangeEnd": "10.56.217.181",
                "routes": [
                        { "dst": "0.0.0.0/0" }
                ],
                "gateway": "10.56.217.1"
        }
}

EOF

SR-IOV Network Operator

SR-IOV Network Operator is used to manage the SR-IOV interfaces on the nodes e.g. change the number of VFs on the node, it is also used to change the link type for the interfaces ETH to IB and vice versa, the network policy example shows how to use the operator to change the link type and SR-IOV attributes for a given PCI physical function address.

System Requirements and Topology

InfiniBand SR-IOV CNI works with kernel 5.6 which supports RDMA network namespace isolation and get/set of a VF's port and node GUID.

The recommended network topology for a Kubernetes deployment with Infiniband as a secondary network is as follows:

  • Two physical networks, one Ethernet network used as Kubernetes management and Pod primary network (these can be separate) and another Infiniband network interconnecting Kubernetes worker nodes.
  • Worker nodes where ib-sriov CNI is invoked are expected to have connectivity through the infiniband fabric with the subnet manager (SM), either running on a managed Infiniband switch or another node (i.e there needs to be an active SM in the fabric).

picture alt

Notes:

  • OpenSM with SR-IOV support should be download form Mellanox OFED.

About

add function: SetupPF sets up a PF in Pod netns

Resources

Readme

License

View license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

4 tags

Packages

No packages published

Languages

  • Go 90.2%
  • Makefile 7.2%
  • Shell 2.0%
  • Dockerfile 0.6%