We are pleased to announce the R2.0 release of MWOSD
Note: This release requires a minimum GUI version of 2.0.0.0
Note: This release will default settings for versions prior to 2.0.0.0 - back up in existing version GUI before upgrading.
The latest GUI is available here for download here:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
2.0.0.1 Summary of changes :
- OSD - Additional Ardupilot flight modes
- OSD - ADSB AGL/ASL reference choice for coexisting with different FC operation
- OSD - Support to display airspeed in knots
- OSD - Improve speed accuracy with mavlink
- FIX - Bugfix for loss of OSD elements from rare UBLOX GPS error message handling
2.0.0.0 Summary of changes :
- OSD - Antenna tracking support - Sentinel AAT support
- OSD - Display element for battery % remaining
- OSD - Display element for embedded VTX
- OSD - Display element for average cell voltage
- OSD - Display element for PID
- OSD - ESC Telemetry OSD target
- OSD - Support for full screen layout in PAL
- OSD - PAL/NTSC autocam option without PAL position manipulation
- OSD - Improved serial performance - especially mavlink
- OSD - Improved VSYNC performance
- OSD - VSYNC - automatically use if supporting hardware detected
- OSD - Support for APM take off mode. TKOF (fixed wing)
- OSD - co-ordinates in DDMMSS (config.h option)
- OSD - Support for Mavlink alternative altitude source (config.h option)
- OSD - Support for KISS GPS RTH (1.3RC44) - xavier
- OSD - Support for KISS Turtle mode (1.3RC44) - xavier
- OSD - Support for KISS Messaging (1.3RC44) - xavier
- OSD - Support for KISS screen swithc from channel 8-10 - xavier
- OSD - Support for KISS FC RSSI (CRSF/GHOST) - xavier
- OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
- OSD - Support for Ardupilot Buddyflight
- OSD - Kiss VTX Power / Channel display
- OSD - Dual timer support
- OSD - Support for average battery cell display
- OSD - Support for Steele PDB
- OSD - Low memory warning added
- OSD - Setting 0 disables all alarm flashing - except voltage
- OSD - filter disabled by default - faster sensor updates are more popular
- OSD - support for canvasOSD - OSD runs purely from OSD
- OSD - LTM2ADSB protocol converter for buddyflight
- OSD - UBLOX2ADSB protocol converter for buddyflight
- OSD - Support for KISS GPS
- OSD - Support for KISS PID menu support
- OSD - Support for KISS Filter menu
- OSD - Support for KISS VTX menu
- OSD - Support for ARDUSUB
- OSD - Support for MAVLINK dual GPS / Baro altitude display
- OSD - Support for MAVLINK high resolution altitude
- OSD - Significantly improved Mavlink messages. Full length and human readable
- OSD - Different indicator icons for GPS, Baro and high resolution altitude values
- OSD - Developer debug memory display functioning for newer compiler versions
- OSD - Support for up to 12s main battery
- OSD - Support for APM VTOL
- OSD - Support for NMEA 9600 baud option pre-compiled
- OSD - Support for SBUS
- OSD - Cleaned up code compiler errors.
- OSD - FlightOne support for 16 channels added
- OSD - FightOne support added. https://flightone.com/
- OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
- OSD - Added a target for display / screen testing
- OSD - Page re-added for iNAV - how to access all FC settings from within OSD
- OSD - Added support for remaining flight time
- GUI - support for all OSD changes
- GUI - 1.9 > 2.0 settings import
- GUI - Faster and more reliable GUI-OSD read / write operations
- GUI - copy layouts
- GUI - move within character editor
- GUI - extend calibration range to 2601 for non std mavlink RSSI
- GUI - DJI Naza available to flash from GUI
- GUI - support for additional OSD enhancements
- GUI - added log player for testing of mavlink / gpsosd etc.
- GUI - minor cosmetic bugfixes
- GUI - improvements for more reliable connect. Work around of bug with OS drivers
- FIX - RSSI for CH8 in KISS
- FIX - font upload corruptions
- FIX - reduced serial data corruption
- FIX - Correct Alt display in high resolution mode (default < 10m)
- FIX - flickering on top line when using VSYNC
- FIX - Bugfix for iNav airspeed display
- FIX - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
- FIX - Bugfix for when selected reversed ahi pitch
- FIX - Bugfix for mavlink auto configure always being enabled
- FIX - bugfix - added resolution for Betaflight sending non valid date
- FIX - bugfix - added default support for mavlink FC that do not send throttle value when armed
- FIX - bugfix for users running iNAV and no GPS - disable low sats text display
- FIX - bugfix for "lat" displayed instead on "lon"
- FIX - bugfix for altitude. Always reported in meters
- FIX - bugfix for max altitude recorded. In some circumstances will not report correctly
- FIX - LTM O frame support removed for FC that do not use it.
- FIX - LTM home set improved
Sentinel Antenna tracker:
https://www.virtualpilot.co.uk/index.php?route=product/product&path=63&product_id=59