Dactyl ManuForm Keyboard

This is a fork of the Dactyl-ManuForm.
The Dactyl-Manuform is a fork of the Dactyl with the thumb cluster from ManuForm.

Differences to carbonfet's dactyl-manuform

This version is adapted to my preferences and requirements. As such, there are a number of changes made to the root projects; the keyboard is still customizable, but changing the variables/parameters may require code changes as well.
Changes to root project:

• Inclusion of crystalhand's wrist-rest
• All 1.0u keys (most ortho kits should provide all caps required for this build)
• Default manuform thumb cluster, but moved out a little bit (I have big hands and want my thumb to rest on the first thumb key)
• Some fixes to the generated bottom plate, which was faulty if extra bottom row is used (which I do)
• Usage of Bossard BN1936 brass inserts (M3) for screws
• Screw nubs moved inside the case

Future changes (planned)

• Removal of controller board / TRRS jack holder breakout and putting of USB-C jack instead
• Development of my own controller board, QMK (and maybe VIA) programmable
• (Hopefully) Usage of BLE (as two separate keyboards) so no connection between the halves required
• (Alternatively) Usage of higher-quality 5-pin jack (no TRRS or audio jacks)

Generate OpenSCAD and STL models

• Run lein generate or lein auto generate
• This will regenerate the things/*.scad files
• Use OpenSCAD to open a .scad file.
• Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
• When done, use OpenSCAD to export STL files

License

Copyright © 2015-2020 Matthew Adereth, Tom Short and Leo Lou, Andreas Hauser

The source code for generating the models is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3.

The generated models are distributed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).