projects: ltc7841: Add README documentation for project

Add README.rst documentation file for project alongside other
documentation related files.

Signed-off-by: Marvin Neil Cabuenas <[email protected]>

doc/sphinx/source/projects/ltc7841.rst

@@ -0,0 +1 @@
+.. include:: ../../../../projects/ltc7841/README.rst

doc/sphinx/source/projects_doc.rst

@@ -72,6 +72,7 @@ POWER MANAGEMENT
    projects/adp1050
    projects/dc2703a
    projects/ltc4296
+   projects/ltc7841
    projects/lt7170
    projects/lt7182s
    projects/lt8722

projects/ltc7841/README.rst

@@ -0,0 +1,128 @@
+Evaluating the LTC7841
+======================
+
+.. contents::
+	:depth: 3
+
+Supported Evaluation Boards
+---------------------------
+
+* `DC2798A <https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/DC2798A.html>`_
+
+Overview
+--------
+
+The evaluation board includes 2 LTC7841 to be powered up with writing to the MFR_VOUT_COMMAND a non-zero value.
+To turn-on the evaluation board, write 0x80 to the OPERATION register and ensure that the MFR_VOUT_COMMAND is actually
+non-zero value.
+
+Full performance details are provided in the LTC7841 data sheet, which should
+be consulted in conjunction with user guide.
+
+Hardware Specifications
+-----------------------
+
+Power Supply Requirements
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For this specific project an external power supply with a variable output of 10-16 Volts
+must be used to power up the demo board.
+
+**Hardware Bringup**
+
+For reference, follow the Quick Start Procedure section of the corresponding
+demo board.
+`user guide <https://www.analog.com/media/en/technical-documentation/user-guides/dc2798a.pdf>`_.
+
+No-OS Build Setup
+-----------------
+
+Please see: https://wiki.analog.com/resources/no-os/build
+
+No-OS Supported Examples
+------------------------
+
+The initialization data used in the examples is taken out from:
+`Project Common Data Path <https://github.com/analogdevicesinc/no-OS/tree/main/projects/ltc7841/src/common>`_
+
+The macros used in Common Data are defined in platform specific files found in:
+`Project Platform Configuration Path <https://github.com/analogdevicesinc/no-OS/tree/main/projects/ltc7841/src/platform>`_
+
+Basic example
+^^^^^^^^^^^^^
+
+This is a simple example that initializes the LTC7841, and performs telemetry
+readings of the voltage, current and temperature of each output channel. Status
+bytes/words are also monitored in the example.
+
+In order to build the basic example make sure you have the following configuration in the Makefile
+`Makefile <https://github.com/analogdevicesinc/no-OS/tree/main/projects/ltc7841/Makefile>`_
+
+.. code-block:: bash
+
+	# Select the example you want to enable by choosing y for enabling and n for disabling
+	BASIC_EXAMPLE = y
+	IIO_EXAMPLE = n
+
+IIO example
+^^^^^^^^^^^
+
+This project is actually a IIOD demo for DC2798-A evaluation board.
+The project launches a IIOD server on the board so that the user may connect
+to it via an IIO client.
+
+If you are not familiar with ADI IIO Application, please take a look at:
+`IIO No-OS <https://wiki.analog.com/resources/tools-software/no-os-software/iio>`_
+
+If you are not familiar with ADI IIO-Oscilloscope Client, please take a look at:
+`IIO Oscilloscope <https://wiki.analog.com/resources/tools-software/linux-software/iio_oscilloscope>`_
+
+The No-OS IIO Application together with the No-OS IIO LTC2798 driver take care of
+all the back-end logic needed to setup the IIO server.
+
+This example initializes the IIO device and calls the IIO app as shown in:
+`IIO Example <https://github.com/analogdevicesinc/no-OS/tree/main/projects/ltc2798/src/examples/iio_example>`_
+
+In order to build the IIO project make sure you have the following configuration in the
+`Makefile <https://github.com/analogdevicesinc/no-OS/tree/main/projects/ltc7841/Makefile>`_
+
+.. code-block:: bash
+
+        # Select the example you want to enable by choosing y for enabling and n for disabling
+        BASIC_EXAMPLE = n
+        IIO__EXAMPLE = y
+
+No-OS Supported Platforms
+-------------------------
+
+Maxim Platform
+^^^^^^^^^^^^^^
+
+**Used hardware**
+
+* `DC2798A <https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/DC2798A.html>`_
+* `MAX3290EVKit <https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html>`_
+
+**Connections**:
+
++---------------------+---------------------+-----------------------------+
+| Max42500 test point | Function            | MAX32690 EVKIT Pin Number   |
++=====================+=====================+=============================+
+| GND (J31)           | Ground              | GND                         |
++---------------------+---------------------+-----------------------------+
+| SDA                 | Serial Data Line    | P2_7                        |
++---------------------+---------------------+-----------------------------+
+| SCL                 | Serial Clock Line   | P2_8                        |
++---------------------+---------------------+-----------------------------+
+
+
+**Build Command**
+
+.. code-block:: bash
+
+	# to delete current build
+	make reset
+	# to build the project
+	make PLATFORM=maxim TARGET=max32690
+	# to flash the code
+	make run