Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: styfle/[email protected], actions/checkout@v2, actions-rs/audit-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/checkout@v2, actions-rs/audit-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

2 warnings found!

Unknown warning kind unsound found, please, file a bug

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: unused `std::result::Result` that must be used --> grovedb/src/replication.rs:86:13 | 86 | / writeln!( 87 | | f, 88 | | " prefix:{:?} -> path:{:?}", 89 | | hex::encode(prefix), 90 | | metadata_path_str 91 | | ); | |_____________^ | = note: this `Result` may be an `Err` variant, which should be handled = note: `#[warn(unused_must_use)]` on by default = note: this warning originates in the macro `writeln` (in Nightly builds, run with -Z macro-backtrace for more info)

warning: very complex type used. Consider factoring parts into `type` definitions --> grovedb/src/lib.rs:958:10 | 958 | ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: very complex type used. Consider factoring parts into `type` definitions --> grovedb/src/lib.rs:888:10 | 888 | ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: very complex type used. Consider factoring parts into `type` definitions --> grovedb/src/lib.rs:862:10 | 862 | ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity = note: `#[warn(clippy::type_complexity)]` on by default

warning: assigning the result of `ToOwned::to_owned()` may be inefficient --> grovedb/src/operations/proof/verify.rs:577:17 | 577 | *current_value_bytes = subquery_path_result_set[0].value.to_owned(); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_into()`: `subquery_path_result_set[0].value.clone_into(current_value_bytes)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones = note: `#[warn(clippy::assigning_clones)]` on by default

warning: this function has too many arguments (9/7) --> grovedb/src/operations/proof/generate.rs:488:5 | 488 | / fn generate_and_store_merk_proof<'a, S, B>( 489 | | &self, 490 | | path: &SubtreePath<B>, 491 | | subtree: &'a Merk<S>, ... | 497 | | key: &[u8], 498 | | ) -> CostResult<(Option<u16>, Option<u16>), Error> | |______________________________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (8/7) --> grovedb/src/operations/proof/generate.rs:172:5 | 172 | / fn prove_subqueries( 173 | | &self, 174 | | proofs: &mut Vec<u8>, 175 | | path: Vec<&[u8]>, ... | 180 | | is_verbose: bool, 181 | | ) -> CostResult<(), Error> { | |______________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (11/7) --> grovedb/src/element/query.rs:546:5 | 546 | / fn query_item( 547 | | storage: &RocksDbStorage, 548 | | item: &QueryItem, 549 | | results: &mut Vec<QueryResultElement>, ... | 557 | | add_element_function: fn(PathQueryPushArgs) -> CostResult<(), Error>, 558 | | ) -> CostResult<(), Error> { | |______________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: this `let...else` may be rewritten with the `?` operator --> grovedb/src/element/helpers.rs:319:9 | 319 | / let Some(value_cost) = self.get_specialized_cost().ok() else { 320 | | return None; 321 | | }; | |__________^ help: replace it with: `let value_cost = self.get_specialized_cost().ok()?;` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#question_mark = note: `#[warn(clippy::question_mark)]` on by default

warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do --> grovedb/src/element/helpers.rs:248:14 | 248 | key: &Vec<u8>, | ^^^^^^^^ help: change this to: `&[u8]` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg = note: `#[warn(clippy::ptr_arg)]` on by default

warning: the borrowed expression implements the required traits --> grovedb/src/debugger.rs:30:34 | 30 | fs::write(&grovedbg_zip, &GROVEDBG_ZIP).expect("cannot crate grovedbg.zip"); | ^^^^^^^^^^^^^ help: change this to: `GROVEDBG_ZIP` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args = note: `#[warn(clippy::needless_borrows_for_generic_args)]` on by default

warning: unnecessary use of `get(&base_path).is_none()` --> grovedb/src/batch/estimated_costs/worst_case_costs.rs:242:34 | 242 | if self.cached_merks.get(&base_path).is_none() { | ------------------^^^^^^^^^^^^^^^^^^^^^^^^^ | | | help: replace it with: `!self.cached_merks.contains(&base_path)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_get_then_check

warning: unnecessary use of `get(path).is_none()` --> grovedb/src/batch/estimated_costs/worst_case_costs.rs:217:30 | 217 | if self.cached_merks.get(path).is_none() { | ------------------^^^^^^^^^^^^^^^^^^^ | | | help: replace it with: `!self.cached_merks.contains(path)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_get_then_check

warning: unnecessary use of `get(&base_path).is_none()` --> grovedb/src/batch/estimated_costs/average_case_costs.rs:277:34 | 277 | if self.cached_merks.get(&base_path).is_none() { | ------------------^^^^^^^^^^^^^^^^^^^^^^^^^ | | | help: replace it with: `!self.cached_merks.contains_key(&base_path)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_get_then_check

warning: unnecessary use of `get(path).is_none()` --> grovedb/src/batch/estimated_costs/average_case_costs.rs:231:30 | 231 | if self.cached_merks.get(path).is_none() { | ------------------^^^^^^^^^^^^^^^^^^^ | | | help: replace it with: `!self.cached_merks.contains_key(path)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_get_then_check = note: `#[warn(clippy::unnecessary_get_then_check)]` on by default

warning: function `read_proof_version` is never used --> grovedb/src/versioning.rs:12:8 | 12 | pub fn read_proof_version(mut bytes: &[u8]) -> Result<u32, Error> { | ^^^^^^^^^^^^^^^^^^

warning: variants `Execute`, `AverageCase`, and `WorstCase` are never constructed --> grovedb/src/batch/mode.rs:46:5 | 45 | pub enum BatchRunMode { | ------------ variants in this enum 46 | Execute, | ^^^^^^^ 47 | #[cfg(feature = "estimated_costs")] 48 | AverageCase(HashMap<KeyInfoPath, EstimatedLayerInformation>), | ^^^^^^^^^^^ 49 | #[cfg(feature = "estimated_costs")] 50 | WorstCase(HashMap<KeyInfoPath, WorstCaseLayerInformation>), | ^^^^^^^^^ | = note: `BatchRunMode` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis

warning: method `get_batch_run_mode` is never used --> grovedb/src/batch/mod.rs:686:8 | 683 | trait TreeCache<G, SR> { | --------- method in this trait ... 686 | fn get_batch_run_mode(&self) -> BatchRunMode; | ^^^^^^^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unused import: `net::Ipv4Addr` --> grovedb/src/debugger.rs:3:15 | 3 | use std::{fs, net::Ipv4Addr, sync::Weak}; | ^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: duplicated attribute --> merk/src/estimated_costs/average_case_costs.rs:77:7 | 77 | #[cfg(feature = "full")] | ^^^^^^^^^^^^^^^^ | note: first defined here --> merk/src/estimated_costs/average_case_costs.rs:76:7 | 76 | #[cfg(feature = "full")] | ^^^^^^^^^^^^^^^^ help: remove this attribute --> merk/src/estimated_costs/average_case_costs.rs:77:7 | 77 | #[cfg(feature = "full")] | ^^^^^^^^^^^^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#duplicated_attributes = note: `#[warn(clippy::duplicated_attributes)]` on by default

warning: this function has too many arguments (8/7) --> merk/src/tree/mod.rs:811:5 | 811 | / pub fn put_value_with_reference_value_hash_and_value_cost( 812 | | mut self, 813 | | value: Vec<u8>, 814 | | value_hash: CryptoHash, ... | 833 | | >, 834 | | ) -> CostResult<Self, Error> { | |________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (8/7) --> merk/src/tree/walk/mod.rs:344:5 | 344 | / pub fn put_value_with_reference_value_hash_and_value_cost( 345 | | mut self, 346 | | value: Vec<u8>, 347 | | value_hash: CryptoHash, ... | 366 | | >, 367 | | ) -> CostResult<Self, Error> { | |________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (9/7) --> merk/src/tree/ops.rs:718:5 | 718 | / fn recurse<K: AsRef<[u8]>, C, V, U, R>( 719 | | self, 720 | | batch: &MerkBatch<K>, 721 | | mid: usize, ... | 727 | | section_removal_bytes: &mut R, 728 | | ) -> CostResult<(Option<Self>, KeyUpdates), Error> | |______________________________________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: assigning the result of `Clone::clone()` may be inefficient --> merk/src/proofs/query/merge.rs:385:17 | 385 | / self.default_subquery_branch.subquery = 386 | | other_default_subquery_branch.subquery.clone(); | |__________________________________________________________________^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_subquery_branch.subquery)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones

warning: assigning the result of `Clone::clone()` may be inefficient --> merk/src/proofs/query/merge.rs:336:25 | 336 | / self.default_subquery_branch.subquery = 337 | | other_default_subquery_branch.subquery.clone(); | |__________________________________________________________________________^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_subquery_branch.subquery)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones

warning: assigning the result of `Clone::clone()` may be inefficient --> merk/src/proofs/query/merge.rs:253:13 | 253 | self.default_subquery_branch.subquery = other_default_branch_subquery.clone(); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_branch_subquery)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones = note: `#[warn(clippy::assigning_clones)]` on by default

warning: module has the same name as its containing module --> merk/src/proofs/chunk.rs:33:1 | 33 | pub mod chunk; | ^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#module_inception = note: `#[warn(clippy::module_inception)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions --> merk/src/merk/mod.rs:559:10 | 559 | ) -> (BTreeMap<Vec<u8>, CryptoHash>, BTreeMap<Vec<u8>, Vec<u8>>) { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: this function has too many arguments (8/7) --> merk/src/merk/apply.rs:277:5 | 277 | / pub fn apply_unchecked<KB, KA, C, V, U, R>( 278 | | &mut self, 279 | | batch: &MerkBatch<KB>, 280 | | aux: &AuxMerkBatch<KA>, ... | 285 | | section_removal_bytes: &mut R, 286 | | ) -> CostResult<(), Error> | |______________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (8/7) --> merk/src/merk/apply.rs:176:5 | 176 | / pub fn apply_with_costs_just_in_time_value_update<KB, KA>( 177 | | &mut self, 178 | | batch: &MerkBatch<KB>, 179 | | aux: &AuxMerkBatch<KA>, ... | 198 | | >, 199 | | ) -> CostResult<(), Error> | |______________________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions --> merk/src/merk/chunks.rs:374:33 | 374 | fn next_chunk(&mut self) -> Option<Result<(Vec<Op>, Option<Vec<u8>>), Error>> { | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity = note: `#[warn(clippy::type_complexity)]` on by default

warning: trait `BTreeMapExtras` is never used --> merk/src/proofs/query/map.rs:405:7 | 405 | trait BTreeMapExtras { | ^^^^^^^^^^^^^^

warning: method `attempt_state_recovery` is never used --> merk/src/merk/restore.rs:390:8 | 66 | impl<'db, S: StorageContext<'db>> Restorer<S> { | --------------------------------------------- method in this implementation ... 390 | fn attempt_state_recovery(&mut self) -> Result<(), Error> { | ^^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: 'test' may be misspelled as 'tests' --> merk/src/tree/fuzz_tests.rs:31:8 | 31 | #![cfg(tests)] | ^^^^^ help: did you mean: `test` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#maybe_misused_cfg = note: `#[warn(clippy::maybe_misused_cfg)]` on by default

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/