v3.7.0

[3.7.0] October 27 2024

IMPORTANT! BREAKING CHANGES with 3.6.5

• "ww" and "wwc" has been renamed to "dhw". It is nested JSON object in both the MQTT and API outputs. The old prefix has also been removed from MQTT topics (#1634). This will impact historical data in home automation systems like Home Assistant and IOBroker. To preserve the current value of dhw energy (was previously nrgww) refer to this issue #1938.
• dhw entities from the MM100/SM100 have been moved under a new Device called 'water'.
• The automatically generated temperature sensor ID has replaced dashes (-) with underscores (_) to be compatible with Home Assistant.
• api/system/info has it's JSON key names changed to camelCase syntax.

For more details go to www.emsesp.org

Added

• some more entities for dhw with SM100 module
• thermostat second dhw circuit #1634
• remote thermostat emulation for RC100H, RC200 and FB10 #1287, #1602, #1551
• heatpump dhw stop temperatures #1624
• reset history #1695
• heatpump entities fan and shutdown #1690
• mqtt HA-mode 3 for v3.6 compatible HA entities, set on update v3.6->v3.7
• HP input states #1723
• holiday settings for rego 3000 #1735
• Added scripts for OTA (scripts/upload.py and upload_cli.py) #1738
• timeout for remote thermostat emulation #1680, #1774
• CR120 thermostat as own model() #1779
• modules - external linkable module library #1778
• scheduler onChange and Conditions #1806
• make remote control timeout editable #1774
• added extra pump characteristics (mode and pressure for EMS+) by @SLTKA #1802
• allow device name to be customized #1174
• Modbus support by @mheyse #1744
• System Message command #1854
• scheduler can use web get/post for values and commands #1806
• RT800 remote emulation #1867
• RC310 cooling parameters #1857
• command api/device/entities #1897
• switchprogmode #1903
• autodetect and download firmware upgrades via the WebUI
• command 'show log' that lists out the current weblog buffer, showing last messages.
• default web log buffer to 25 lines for ESP32s with no PSRAM
• try and determine correct board profile if none is set during boot
• auto Scroll in WebLog UI - reduced delay so incoming logs are faster
• uploading custom support info, shown to Guest users in Help page #2054
• feature: Dashboard showing all data (favorites, sensors, custom) #1958
• entity for low-temperature boilers pump start temp (pumpOnTemp) #2088 #2088
• internal ESP32 temperature sensor on the S3 #2077
• MQTT status topic (used in connect and last will) set to Retain #2086
• Czech language 2096
• Developer Mode and send EMS Read Commands from WebUI #2116
• Scheduler functions #2115
• Set device custom name from telegram 0x01 #2073

Fixed

• remote thermostat emulation for RC200 on Rego2000/3000 thermostats #1691
• log shows data for F7/F9 requests
• Detection of LittleFS for factory setting wasn't working
• Check for bad GPIOs with Ethernet before the ethernet is initialized
• Show values with factor 50 on webUI #2064
• Rendering of values between -1 and 0
• Value for 32bit times not-set #2109

Changed

• use flag for BC400 compatible thermostats, manage different mode settings
• use factory partition for 16M flash
• store digital out states to nvs
• Refresh UI - moving settings to one location #1665
• rename DeviceValueTypes, add UINT32 for custom entities
• dynamic register dhw circuits for thermostat
• removed OTA feature #1738
• added shower min duration #1801
• Include TXT file along with the generated CSV for Device Data export/download
• thermostat/remotetemp as command #1835
• temperaturesensor id notation with underscore #1794
• Change key-names in JSON to be compliant and consistent #1860
• Updates to webUI #1920
• Correct firmware naming #1933 #1933
• Don't start Serial console if not connected to a Serial port. Will initiate manually after a CTRL-C/CTRL-S
• WebLog UI matches color schema of the terminal console correctly
• Updated Web libraries, ArduinoJson
• Help page doesn't show detailed tech info if the user is not 'admin' role #2054
• removed system command allvalues and moved to an action called export
• Show ems-esp internal devices in device list of system/info
• Scheduler and mqtt run async on systems with psram
• Show IPv6 address type (local/global/ula) in log