Name: SMART_METER_ESP32_2432S028_v2024.ino

Created: 2024 and also under construction

Author: ON4JES / ON7LSP /

This is a sketch for 7 bargraph meters on a 240 x 320, 2.8 TFT display (touch is not used) with ILI9341 for the Yaesu FT-991a (and FT-991). Make sure your display uses the ILI9341 driver, otherwise it will not work. There are also files available at Github for the FTdx-101MP and FTdx-101D. It uses CAT commands through the RS232 port of the radio (The USB connection of the radio stays fully operational). It measures all 7 meters of the radio and also shows the present power setting. It checks with a green/red indication if there is connection with the radio with the correct baudrate. It also has an external tune button possibility. Just add a momentary pushbutton (if desired). On button press: it reads present power and mode setting, then sets PWR to a selected value, mode to FM-N, then enables the MOX. On button release: it disables the TX and restores original power and mode settings. This software is a project written by ON4JES & ON7LSP and is in the public domain. You must set the transceiver's RS232 connection to 38400 bps. This is version 1234.T first release, only tested on a FT-991a, but it should also work on a FT-991.

bij opstart eerst wifisettings invullen

hotspotnaam: SmartMeter

Wachtwoord: smartadmin

Daarna als deze correct zijn heb je toegang tot de webserver van de SmartMeter => 192.168.0.*** Display gaat door naar de meters en toont bovenaan rechts het ip adres waar je de webserver kan bereiken.