##Simple GUI-based DAQ system for a edge-TCT setup.

The software allows to collect waveforms at certain positions and perform 3D scans of the sample with live monitoring. Also knife-edge scans of the laser beam are possible. The data is saved as numpy arrays in a hdf5 file.

###Hardware:

• Newport ESP301 Controller with 3 stages:
  • M-ILS150CC stage
  • M-ILS100CC stage
  • M-VP-5ZA stage
• Tektronix DPO5204B 2GHz

###Software Requirements:

• Python3 (ConfigObj, PyQt5, numpy, matplotlib, pyserial, pyvisa)
• Qt5
• NI VISA

###Use: After all packages were installed the software can be easily started with:

python main.py