Python Software developed to build a Raspberry Pi scale, using Weight Sensor HX711. Main code HoneyHoney.py largely inspired by https://github.com/tatobari/hx711py Useful tuto to build your scale: https://tutorials-raspberrypi.com/digital-raspberry-pi-scale-weight-sensor-hx711/.
Data are sent to a MQTT broker.
This project was initially developed to remotely control the weigh of a hive, in order to determine the best time for harvest.
Many thanks to Seb ;)
- Using MQTT client with Python
If you want to use this feature, please download the librairy. For Linux:
sudo apt-get install -y python-paho-mqtt
- Clone the GitHub project
Go to the /home/pi/ directory and clone the git repository
git clone https://github.com/girardcarillo/HoneyHoney.git
Go to HoneyHoney directory.
The config.sh executable writes in /etc/rc.local in order to execute the HoneyHoney script at
each boot.
So if you want the HoneyHoney.py to be launched at boot, please:
sudo ./config.sh
Check if the file had been correctly written, otherwise you will not be able to boot anymore. Now when you will boot your Raspi again, the python process should be running (better to test this feature at the end of this tuto).
In the file HoneyHoney.py search for the line
hx.set_reference_unit(24)
and comment it. Uncomment the line
hx.set_reference_unit(referenceUnit)
With nothing on the scale, in your terminal run
sudo python HoneyHoney.py
Some values are printing in your terminal, and the tare of the balance is done, creating a file
tare.txt to record the offset value.
Rq: for our needs, the tare is only done once (at first use).
You can tare again at anytime by removing the tare.txt file.
If you want to remove this feature, please edit the tare_A() method in hx711.py.
The correct calibration of the weight sensor and the Raspberry Pi balance is crucial. For this we need a comparison object whose weight we know. For example, take two packs of milk (1kg each), but keep in mind it is recommended to choose an average value of the maximum you want to weigh. Place it on the scale and run the python code again. The displayed values can be positive as well as negative. For example, if at 2kg (= 2000 gramm) values around -882000 are displayed, then the reference value is -882000 ÷ 2000 = -41. Then edit the HoneyHoney.py file in the same way as above described, remove the comment hashtag and enter this value accordingly. The line now looks as follows:
hx.set_reference_unit(-441)
# hx.set_reference_unit(referenceUnit)
Your scale is ready, you can now weigh the world 🐝 🐝 🐝
