CI: pre-commit autoupdate (aristanetworks#4936)

Co-authored-by: gmuloc <[email protected]>

.pre-commit-config.yaml

@@ -75,7 +75,7 @@ repos:
 
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.9.2
+    rev: v0.9.3
     hooks:
       # Run the linter.
       - id: ruff
@@ -117,7 +117,7 @@ repos:
         name: Check for Linting errors on Jinja2 files
 
   - repo: https://github.com/codespell-project/codespell
-    rev: v2.3.0
+    rev: v2.4.0
     hooks:
       - id: codespell
         name: Check for common misspellings in text files.
@@ -213,7 +213,7 @@ repos:
         additional_dependencies: ['Jinja2>=3.0.0', 'cryptography>=38.0.4', 'deepmerge>=1.1.0']
 
   - repo: https://github.com/igorshubovych/markdownlint-cli
-    rev: v0.43.0
+    rev: v0.44.0
     hooks:
       - id: markdownlint
         name: Check for Linting errors on Markdown files with settings defined in `.github/.markdownlint.yaml`.

ansible_collections/arista/avd/examples/dual-dc-l3ls/README.md

@@ -342,7 +342,7 @@ l3leaf:
 7. `mlag_peer_ipv4_pool` defines the IP scope from which AVD assigns IPv4 addresses for the MLAG peer link interface VLAN4094.
 8. `mlag_peer_l3_ipv4_pool` defines the IP scope from which AVD assigns IPv4 addresses for the iBGP peering established between the two leaf switches via the SVI/IRB interface VLAN4093.
 9. `virtual_router_mac_address` defines the MAC address used for the anycast gateway on the various subnets. This is the MAC address connected endpoints will learn when ARPing for their default gateway.
-10. `spanning_tree_priority` sets the spanning tree priority. Since spanning tree in an L3LS network is effectively only running locally on the switch, the same priority across all L3 leaf switches can be re-used.
+10. `spanning_tree_priority` sets the spanning tree priority. Since spanning tree in an L3LS network is effectively only running locally on the switch, the same priority across all L3 leaf switches can be reused.
 11. `spanning_tree_mode` defines the spanning tree mode. In this case, we are using MSTP, which is the default. However, other modes are supported should they be required, for example, for connectivity to legacy or third-party vendor environments.
 12. `node_groups` defines settings common to more than one node. For example, when exactly two nodes are part of a node group for leaf switches, AVD will, by default, automatically generate MLAG configuration.
 13. `bgp_as` is defined once since an MLAG pair shares a single BGP AS number.

ansible_collections/arista/avd/examples/single-dc-l3ls/README.md

@@ -455,7 +455,7 @@ l3leaf:
 9. `mlag_peer_ipv4_pool` defines the IP scope from which AVD assigns IPv4 addresses for the MLAG peer link interface VLAN4094.
 10. `mlag_peer_l3_ipv4_pool` defines the IP scope from which AVD assigns IPv4 addresses for the iBGP peering established between the two leaf switches via the SVI/IRB interface VLAN4093.
 11. `virtual_router_mac_address` defines the MAC address used for the anycast gateway on the various subnets. This is the MAC address connected endpoints will learn when ARPing for their default gateway.
-12. `spanning_tree_priority` sets the spanning tree priority. Since spanning tree in an L3LS network is effectively only running locally on the switch, the same priority across all L3 leaf switches can be re-used.
+12. `spanning_tree_priority` sets the spanning tree priority. Since spanning tree in an L3LS network is effectively only running locally on the switch, the same priority across all L3 leaf switches can be reused.
 13. `spanning_tree_mode` defines the spanning tree mode. In this case, we are using MSTP, which is the default. However, other modes are supported should they be required, for example, for connectivity to legacy or third-party vendor environments.
 14. `node_groups` defines settings common to more than one node. For example, when exactly two nodes are part of a node group for leaf switches, AVD will, by default, automatically generate MLAG configuration.
 15. `bgp_as` is defined once since an MLAG pair shares a single BGP AS number.

python-avd/pyavd/_eos_designs/schema/schema_fragments/mlag_ibgp_peering_vrfs.schema.yml

@@ -14,7 +14,7 @@ keys:
       On mlag leafs, an SVI interface is defined per vrf, to establish iBGP peering (required when there are MLAG leafs in topology).
       The SVI id will be derived from the base vlan defined: mlag_ibgp_peering_vrfs.base_vlan + (vrf_id or vrf_vni) - 1.
       Depending on the values of vrf_id / vrf_vni it may be required to adjust the base_vlan to avoid overlaps or invalid vlan ids.
-      The SVI ip address derived from mlag_l3_peer_ipv4_pool is re-used across all iBGP peerings.
+      The SVI ip address derived from mlag_l3_peer_ipv4_pool is reused across all iBGP peerings.
     keys:
       base_vlan:
         type: int

python-avd/tests/schema_tools/artifacts/eos_designs.schema.yml

@@ -1145,7 +1145,7 @@ keys:
       Depending on the values of vrf_id / vrf_vni it may be required to adjust the
       base_vlan to avoid overlaps or invalid vlan ids.
 
-      The SVI ip address derived from mlag_l3_peer_ipv4_pool is re-used across all
+      The SVI ip address derived from mlag_l3_peer_ipv4_pool is reused across all
       iBGP peerings.
 
       '