How to freeze

doc/cabal-commands.rst

@@ -499,38 +499,23 @@ flag.
 cabal freeze
 ^^^^^^^^^^^^
 
-If a package is built in several different environments, such as a
-development environment, a staging environment and a production
-environment, it may be necessary or desirable to ensure that the same
-dependency versions are selected in each environment. This can be done
-with the ``freeze`` command:
-
-``cabal freeze`` writes out a **freeze file** which records all of
-the versions and flags that are picked by the solver under the
-current index and flags.  Default name of this file is
-``cabal.project.freeze`` but in combination with a
-``--project-file=my.project`` flag (see :ref:`project-file
-<cmdoption-project-file>`)
-the name will be ``my.project.freeze``.
-A freeze file has the same syntax as ``cabal.project`` and looks
-something like this:
-
-.. highlight:: cabal
+.. code-block:: console
 
-::
+    $ cabal freeze
 
-    constraints: HTTP ==4000.3.3,
-                 HTTP +warp-tests -warn-as-error -network23 +network-uri -mtl1 -conduit10,
-                 QuickCheck ==2.9.1,
-                 QuickCheck +templatehaskell,
-                 -- etc...
+generates ``cabal.project.freeze`` file, which describes the exact dependency
+tree as it was resolved at that moment by Cabal.  This means it captures an
+exact version of every dependency, including dependencies of dependencies,
+recursively all the way.
 
+Since ``cabal`` reads ``cabal.project.freeze`` when present, and takes into
+consideration the version constraints in it, this means that by producing
+``cabal.project.freeze`` you are guaranteed that every future ``cabal`` call
+will use the exact same set of dependencies, regardless of any updates (even
+patches) that might get published for these dependencies in the meantime.
+Therefore, we have effectively "frozen" the dependencies in place.
 
-For end-user executables, it is recommended that you distribute the
-``cabal.project.freeze`` file in your source repository so that all
-users see a consistent set of dependencies. For libraries, this is not
-recommended: users often need to build against different versions of
-libraries than what you developed against.
+``cabal.project.freeze`` is intended to be committed to the version control.
 
 cabal gen-bounds
 ^^^^^^^^^^^^^^^^
@@ -876,7 +861,7 @@ data-files from the store.
 .. _adding-libraries:
 
 Adding libraries to GHC package environments
-""""""""""""""""""""""""""""""""""""""""""""
+********************************************
 
 It is also possible to "install" libraries using the ``--lib`` flag. For
 example, this command will build the latest Cabal library and install it:

doc/cabal-project-description-file.rst

@@ -24,7 +24,7 @@ file with ``profiling: True``.
 
 The full configuration of a project is determined by combining the
 following sources (later entries override earlier ones, except for appendable
-options):
+options, like dependency version constraints):
 
 1. :ref:`The user-wide global configuration <config-file-discovery>` (default: ``~/.config/cabal/config``)
 

doc/how-to-freeze-versions.rst

@@ -0,0 +1,247 @@
+How to control versions
+=======================
+
+There are various ways and places to limit what versions the solver can pick for
+dependencies.
+
+Version ranges
+    Within a package description, version ranges for dependencies can be; tight
+    or loose or missing altogether.
+
+Version constraints
+    Within a project, version constraints for dependencies limit the versions
+    that the solver can pick.
+
+Curated version sets
+    A project can import curated sets of packages and versions that are known to
+    work together, such as those Stackage provides for Cabal's use.
+
+Capped repository versions
+    Adding ``index-state`` to a project limits versions coming from Hackage to
+    include only those that were available at the cutoff time.
+
+Frozen versions
+    Pins the versions picked by the solver for all dependencies. This is a way
+    to preserve a set of versions found by the solver, a solver-curated set, if
+    you will.
+
+Version exceptions
+    Allow newer or older dependencies.
+
+Version ranges
+--------------
+
+A dependency can have a version range specified in the package description.
+Published packages are expected to attach version ranges to dependencies that
+conform to a set of rules that ``cabal check`` command will check for and report
+on:
+
+- that lower bounds are inclusive
+- that upper bounds are exclusive
+- that upper bounds don't have trailing zeros
+- that upper bounds are not missing
+- that upper bounds are not missing for ``base``
+
+For large projects with many packages, it would be a lot of work to keep all
+package dependency version ranges up to date. Ways of overcoming this are:
+
+- use a bash script to replace or update version ranges in all package descriptions
+- use a package generator like ``hpack-dhall-cabal`` to import sets of dependencies with version ranges
+- use a ``cabal.project`` file to specify version constraints for some or all dependencies
+- use a curated set of packages and versions and import these into the project
+
+Version constraints
+-------------------
+
+Version constraints can be applied to the project or command line.
+
+.. Note::
+
+    While they do not directly restrain dependency versions, flag constraints
+    can alter the set of dependencies of a package.
+
+.. Warning::
+
+    Version constraints are additive. If I add a constraint it doesn't remove or
+    replace prior constraints on versions. Constraints don't have override
+    semantics.
+
+Curated version sets
+--------------------
+
+Stackage provides curated sets of packages and versions that are known to work
+together and are updated regularly.  The latest resolver is the nightly and this
+typically lags a bit behind the latest available GHC version. The LTS resolvers
+will each follow a specific GHC version and are updated less frequently.
+
+Capped repository versions
+--------------------------
+
+.. _freeze-versions:
+
+Frozen versions
+---------------
+
+Pinning adds a version equality constraint for each package in the set of
+project dependencies, explicit and transitive.  The ``cabal freeze`` command
+saves these to a file named the same as the whole of the project file name but
+with a extra ``.freeze`` extension, so the freeze file for ``cabal.project`` is
+``cabal.project.freeze``. Effectively a ``.freeze`` file is an implicit project
+import, same as the ``.local`` file for projects.
+
+.. Warning::
+
+    The order of imports of ``.local`` and ``.freeze`` files is important.  The
+    ``.local`` file is imported last, after the ``.freeze`` file, giving the
+    user a final say in the setting of any fields that have override semantics.
+
+.. Warning::
+
+    A project or package that may build with a variety of compiler versions will
+    be locked to a particular compiler version by freezing.  For instance, if
+    ``cabal init`` is used to create an executable package,
+    ``unconstrained-base-exe.cabal``, after removing version constraints on base
+    it can be frozen with various compiler versions that will each bring in
+    their set of boot libraries as dependencies.
+
+    .. code-block:: cabal
+
+        executable unconstrained-base-exe
+        build-depends: base >0
+
+    .. code-block:: diff
+
+        $ cabal freeze --with-compiler=ghc-8.10.7
+        $ mv cabal.project.freeze ghc-8.10.7.freeze
+
+        $ cabal freeze --with-compiler=ghc-9.10.1
+        $ mv cabal.project.freeze ghc-9.10.1.freeze
+
+        $ cabal freeze --with-compiler=ghc-9.12.1
+        $ mv cabal.project.freeze ghc-9.12.1.freeze
+
+        $ diff ghc-8.10.7.freeze ghc-9.12.1.freeze --unified
+        -constraints: any.base ==4.14.3.0,
+        -             any.ghc-prim ==0.6.1,
+        -             any.integer-gmp ==1.0.3.0,
+        -             any.rts ==1.0.1
+        +constraints: any.base ==4.21.0.0,
+        +             any.ghc-bignum ==1.3,
+        +             any.ghc-internal ==9.1201.0,
+        +             any.ghc-prim ==0.13.0,
+        +             any.rts ==1.0.2
+
+        $ diff ghc-9.10.1.freeze ghc-9.12.1.freeze --unified
+        -constraints: any.base ==4.20.0.0,
+        +constraints: any.base ==4.21.0.0,
+                      any.ghc-bignum ==1.3,
+        -             any.ghc-internal ==9.1001.0,
+        -             any.ghc-prim ==0.11.0,
+        +             any.ghc-internal ==9.1201.0,
+        +             any.ghc-prim ==0.13.0,
+                      any.rts ==1.0.2
+
+Do you need to freeze?
+^^^^^^^^^^^^^^^^^^^^^^
+
+Why would you want to freeze? Don't we want to get minor updates of our
+dependencies, or at least patches, as soon as we can?  Well, although they
+shouldn't, it is possible that any kind of update introduces new bugs,
+performance issues, or some other kind of unexpected behaviour.  This is where
+``cabal.project.freeze`` comes in, as it ensures that dependencies don't
+unexpectedly change.  You can still update your dependencies, but you have to do
+it on purpose, by modifying or by deleting and regenerating
+``cabal.project.freeze`` file, and in the meantime you are guaranteed no
+surprises will happen.
+
+This consistency can be valuable as it ensures that all teammates, deployments,
+and continuous integration are installing the exactly same dependencies.  So if
+you are running and testing the code on your local machine, you are guaranteed
+that your teammate and your continuous integration will be running the exact
+same code, and that at the end that exact same code will get deployed.
+
+A ``.freeze`` file can be good to have when developing for yourself or within a
+private team.  If anyone using it can somehow have different inputs to
+the solver then the ``.freeze`` file can be troublesome.  It can prevent the
+solver from finding a different version of a dependency that would satisfy a
+different architecture or a different compiler version and boot libraries.
+
+.. Warning::
+
+    If publishing a package to Hackage, not matter what kind of component it
+    contains, don't include a ``.freeze`` file, don't add it to any field of the
+    package description that would have ``cabal sdist`` include it in the
+    ``.tar.gz``. In general, don't include anything in the package description
+    that relates to the project environment, like ``cabal.project`` or
+    ``cabal.project.local``.
+
+Freezing workflows
+^^^^^^^^^^^^^^^^^^
+
+.. Warning::
+    For each of these workflows, you may have to first delete the
+    ``index-state`` line from ``cabal.project`` (and from
+    ``cabal.project.freeze`` if it exists) and then run ``cabal update`` to
+    ensure that cabal will have newer versions to re-resolve the dependencies
+    with. Alternatively, you can run ``cabal update
+    --ignore-project``.
+
+Freeze
+    If the ``cabal.project.freeze`` file doesn't exist, generating one is a
+    great way to see what versions of dependencies are currently being used even
+    if you choose to discard the ``.freeze`` file after inspecting it.
+
+Thaw, Freeze
+    If you changed the version ranges of any of the dependencies in any of your
+    project's package descriptions, in any ``.cabal`` file, then delete the
+    ``cabal.project.freeze`` file if it already exists and run ``cabal freeze``
+    to generate fresh version of ``cabal.project.freeze``.
+
+Freeze, Freeze (Freezing Harder)
+    You might in some cases want to skip deletion of ``cabal.project.freeze``,
+    but keep in mind that in that case ``cabal freeze`` will use existing
+    ``cabal.project.freeze`` when resolving dependencies, therefore not updating
+    any existing dependencies, only adding new ones.
+
+Partial Thaw, Freeze
+    If you want to a pick up a different version of a single dependency, you can
+    delete its constraint from ``cabal.project.freeze`` and then run ``cabal
+    freeze`` again.
+
+.. Note::
+
+    If not sure, pick the "thaw, freeze" workflow, as it is the safest, the
+    simplest and the most common. Finally, you will always want to commit the
+    changed ``cabal.project.freeze`` to version control.
+
+Ensuring everything is frozen
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. Note::
+
+    If the ``.freeze`` file already has version equality constraints for every
+    package that is a dependency of the project, then the solver will not be
+    able to find a different version for any of them, the ``.freeze`` file
+    cannot change and, at that point when every dependency is frozen, ``cabal
+    freeze`` becomes an idempotent operation.
+
+Adding a dependency to one of the packages in a project without freezing harder
+leaves the newly added dependency susceptible to getting updated unexpectedly
+when the solver can find a different version for it.  Running ``cabal freeze``
+will show this vulnerability to a human or an automated check that notices a new
+version equality constraint in the ``.freeze`` file, a constraint for a package
+that wasn't in the ``.freeze`` file before.
+
+To automate this check, make it a part of continuous integration or make a
+pre-commit hook for it. A simple check for this might be to compare the md5sum
+of the ``.freeze`` file before and after running ``cabal freeze``.  If the
+checksums are the same, then the ``.freeze`` file didn't change, and all
+versions are frozen.
+
+.. code-block:: bash
+
+    [[ -f cabal.project.freeze ]] || exit 1
+    OLD_FREEZE_SUM=$(md5sum cabal.project.freeze)
+    cabal freeze || exit 1
+    NEW_FREEZE_SUM=$(md5sum cabal.project.freeze)
+    exit [[ "$NEW_FREEZE_SUM" == "$OLD_FREEZE_SUM" ]]

doc/index.rst

@@ -15,6 +15,7 @@ Welcome to the Cabal User Guide
 
    how-to-package-haskell-code
    how-to-source-packages
+   how-to-freeze-versions
    how-to-enable-profiling
    how-to-build-like-nix
    how-to-run-in-windows