Fix typo "archive", replacing it with the correct "achieve" (#4861)

Fix typo "archive" with "achieve"

There is a small typo in the sensor_description_bluetooth_ble_beacon_monitor string.

Should be "achieve" where it says "archive".

common/src/main/res/values/strings.xml

@@ -593,7 +593,7 @@
     <string name="sensor_description_battery_state">The current charging state of the battery</string>
     <string name="sensor_description_battery_temperature">The current battery temperature</string>
     <string name="sensor_description_bluetooth_ble_emitter">Send BLE iBeacon with configured interval, used to track presence around house, e.g. together with roomassistant, esp32-mqtt-room or espresence projects.\n\nWarning: this can affect battery life, particularly if the \"Transmitter power\" setting is set to High or \"Advertise Mode\" is set to Low latency.\n\nSettings allow for specifying:\n- \"UUID\" (standard UUID format), \"Major\" and \"Minor\" (should be 0 - 65535), to tailor identifiers and groups. The default Minor value 40004 has the special meaning of forcing the beacon to be recognized by the iBeacon Tracker integration\n- \"Transmitter Power\" and \"Advertise Mode\" to help to preserve battery life (use lowest values if possible)\n - \"Measured Power\" to specify power measured at 1m (initial default -59)\n\nIt is also possible to set beacons to only be transmitted when connected to a Home Network WiFi SSID, which may be desirable for privacy and battery life.\n\nNote:\nAdditionally a separate setting exists (\"Enable Transmitter\") to stop or start transmitting.</string>
-    <string name="sensor_description_bluetooth_ble_beacon_monitor">Scans for iBeacons and shows the IDs of nearby beacons and their distance in meters. A notification will be shown on the device when scanning is actively running.\n\nWarning: this can affect battery life, especially with a short \"Scan Interval\".\n\nSettings allow for specifying:\n- \"Filter Iterations\" (should be 1 - 100, default: 10), higher values will result in more stable measurements but also less responsiveness.\n- \"Filter RSSI Multiplier\" (should be 1.0 - 2.0, default: 1.05), can be used to archive more stable measurements when beacons are farther away. This will also affect responsiveness.\n- \"Scan Interval\" (default: 500) milliseconds between scans. Shorter intervals will drain the battery more quickly.\n- \"Scan Period\" (default: 1100) milliseconds to scan for beacons. Most beacons will send a signal every second so this value should be at least 1100ms.\n- \"UUID Filter\" allows to restrict the reported beacons by including (or excluding) those with the selected UUIDs.\n- \"Exclude selected UUIDs\", if false (default) only the beacons with the selected UUIDs are reported. If true all beacons except the selected ones are reported. Not available when \"UUID Filter\" is empty.\n\nNote:\nAdditionally a separate setting exists (\"Enable Beacon Monitor\") to stop or start scanning.</string>
+    <string name="sensor_description_bluetooth_ble_beacon_monitor">Scans for iBeacons and shows the IDs of nearby beacons and their distance in meters. A notification will be shown on the device when scanning is actively running.\n\nWarning: this can affect battery life, especially with a short \"Scan Interval\".\n\nSettings allow for specifying:\n- \"Filter Iterations\" (should be 1 - 100, default: 10), higher values will result in more stable measurements but also less responsiveness.\n- \"Filter RSSI Multiplier\" (should be 1.0 - 2.0, default: 1.05), can be used to achieve more stable measurements when beacons are farther away. This will also affect responsiveness.\n- \"Scan Interval\" (default: 500) milliseconds between scans. Shorter intervals will drain the battery more quickly.\n- \"Scan Period\" (default: 1100) milliseconds to scan for beacons. Most beacons will send a signal every second so this value should be at least 1100ms.\n- \"UUID Filter\" allows to restrict the reported beacons by including (or excluding) those with the selected UUIDs.\n- \"Exclude selected UUIDs\", if false (default) only the beacons with the selected UUIDs are reported. If true all beacons except the selected ones are reported. Not available when \"UUID Filter\" is empty.\n\nNote:\nAdditionally a separate setting exists (\"Enable Beacon Monitor\") to stop or start scanning.</string>
     <string name="sensor_description_bluetooth_connection">Information about currently connected Bluetooth devices</string>
     <string name="sensor_description_bluetooth_state">Whether Bluetooth is enabled on the device</string>
     <string name="sensor_description_car_battery">Remaining car battery percentage</string>