This (non official) repository provides dockerized (MTA) Mail Transfer Agent (SMTP) service using Postfix and Dovecot.
- MTA (SMTP) server and client Postfix
- SMTP client authentication on the SMTPS (port 465) and submission (port 587) using Dovecot
- PostSRSd, sender rewriting scheme
- Hooks for integrating Let’s Encrypt LTS certificates using the reverse proxy Traefik
- Consolidated configuration and run data under
/srv
to facilitate persistent storage - Simplified configuration of passwd file authentication, mailbox lookup using environment variables
- Simplified configuration of LDAP authentication, mailbox and alias lookup using environment variables
- Simplified configuration of MySQL authentication, mailbox and alias lookup using environment variables
- Simplified configuration of remote IMAP authentication using environment variables
- Simplified configuration of SMTP relay using environment variables
- Simplified configuration of secure SMTP, IMAP and POP3 TLS using environment variables
- Simplified generation of Diffie-Hellman parameters needed for EDH using utility script
- Multi-staged build providing the images Â
base
andfull
- Configuration using environment variables
- Log directed to docker daemon with configurable level
- Built in utility script
run
helping configuring Postfix and Dovecot - Makefile which can build images and do some management and testing
- Health check
- Small image size based on Alpine Linux
- Demo based on
docker-compose.yml
andMakefile
files
The MAJOR.MINOR.PATCH SemVer is
used. In addition to the three number version number you can use two or
one number versions numbers, which refers to the latest version of the
sub series. The tag latest
references the build based on the latest commit to the repository.
The mlan/postfix
repository contains a multi staged built. You select which build using the appropriate tag from base
and full
. The image base
only contain Postfix. The image built with the tag full
extend base
to include Dovecot, which provides mail delivery via IMAP and POP3 and SMTP client authentication as well as integration of Let’s Encrypt TLS certificates using Traefik.
To exemplify the usage of the tags, lets assume that the latest version is 1.0.0
. In this case latest
, 1.0.0
, 1.0
, 1
, full
, full-1.0.0
, full-1.0
and full-1
all identify the same image.
Often you want to configure Postfix and its components. There are different methods available to achieve this. Many aspects can be configured using environment variables described below. These environment variables can be explicitly given on the command line when creating the container. They can also be given in an docker-compose.yml
file, see the docker compose example below. Moreover docker volumes or host directories with desired configuration files can be mounted in the container. And finally you can docker exec
into a running container and modify configuration files directly.
You can start a mlan/postfix
container using the destination domain example.com
and table mail boxes for [email protected] and [email protected] by issuing the shell command below.
docker run -d --name mta --hostname mx1.example.com -e MAIL_BOXES="[email protected] [email protected]" -p 127.0.0.1:25:25 mlan/postfix
One convenient way to test the image is to clone the github repository and run the demo therein, see below.
An example of how to configure an web mail server using docker compose is given below. It defines 5 services, app
, mta
, filt
, db
and auth
, which are the web mail server, the mail transfer agent, the SQL database and LDAP authentication respectively.
name: demo
services:
app:
image: mlan/kopano
networks:
- backend
ports:
- "127.0.0.1:8008:80" # WebApp & EAS (alt. HTTP)
- "127.0.0.1:143:143" # IMAP (not needed if all devices can use EAS)
- "127.0.0.1:110:110" # POP3 (not needed if all devices can use EAS)
- "127.0.0.1:8080:8080" # ICAL (not needed if all devices can use EAS)
- "127.0.0.1:993:993" # IMAPS (not needed if all devices can use EAS)
- "127.0.0.1:995:995" # POP3S (not needed if all devices can use EAS)
- "127.0.0.1:8443:8443" # ICALS (not needed if all devices can use EAS)
depends_on:
- auth
- db
- mta
environment: # Virgin config, ignored on restarts unless FORCE_CONFIG given.
- USER_PLUGIN=ldap
- LDAP_URI=ldap://auth:389/
- MYSQL_HOST=db
- SMTP_SERVER=mta
- LDAP_SEARCH_BASE=${AD_BASE-dc=example,dc=com}
- LDAP_USER_TYPE_ATTRIBUTE_VALUE=${AD_USR_OB-kopano-user}
- LDAP_GROUP_TYPE_ATTRIBUTE_VALUE=${AD_GRP_OB-kopano-group}
- LDAP_GROUPMEMBERS_ATTRIBUTE_TYPE=dn
- LDAP_PROPMAP=
- DAGENT_PLUGINS=movetopublicldap
- MYSQL_DATABASE=${MYSQL_DATABASE-kopano}
- MYSQL_USER=${MYSQL_USER-kopano}
- MYSQL_PASSWORD=${MYSQL_PASSWORD-secret}
- IMAP_LISTEN=*:143 # also listen to eth0
- POP3_LISTEN=*:110 # also listen to eth0
- ICAL_LISTEN=*:8080 # also listen to eth0
- IMAPS_LISTEN=*:993 # enable TLS
- POP3S_LISTEN=*:995 # enable TLS
- ICALS_LISTEN=*:8443 # enable TLS
- PLUGIN_SMIME_USER_DEFAULT_ENABLE_SMIME=true
- SYSLOG_LEVEL=${SYSLOG_LEVEL-3}
- LOG_LEVEL=${LOG_LEVEL-3}
volumes:
- app-conf:/etc/kopano
- app-atch:/var/lib/kopano/attachments
- app-sync:/var/lib/z-push
- app-spam:/var/lib/kopano/spamd # kopano-spamd integration
- /etc/localtime:/etc/localtime:ro # Use host timezone
cap_add: # helps debugging by allowing strace
- sys_ptrace
mta:
image: mlan/postfix
hostname: ${MAIL_SRV-mx}.${MAIL_DOMAIN-example.com}
networks:
- backend
ports:
- "127.0.0.1:25:25" # SMTP
- "127.0.0.1:465:465" # SMTPS authentication required
depends_on:
- auth
environment: # Virgin config, ignored on restarts unless FORCE_CONFIG given.
- MESSAGE_SIZE_LIMIT=${MESSAGE_SIZE_LIMIT-25600000}
- LDAP_HOST=auth
- VIRTUAL_TRANSPORT=lmtp:app:2003
- SMTPD_MILTERS=inet:flt:11332
- MILTER_DEFAULT_ACTION=accept
- SMTP_RELAY_HOSTAUTH=${SMTP_RELAY_HOSTAUTH-}
- SMTP_TLS_SECURITY_LEVEL=${SMTP_TLS_SECURITY_LEVEL-}
- SMTP_TLS_WRAPPERMODE=${SMTP_TLS_WRAPPERMODE-no}
- SMTPD_USE_TLS=yes
- LDAP_USER_BASE=ou=${AD_USR_OU-users},${AD_BASE-dc=example,dc=com}
- LDAP_QUERY_FILTER_USER=(&(objectclass=${AD_USR_OB-kopano-user})(mail=%s))
- LDAP_QUERY_FILTER_ALIAS=(&(objectclass=${AD_USR_OB-kopano-user})(kopanoAliases=%s))
- LDAP_QUERY_ATTRS_PASS=uid=user
- REGEX_ALIAS=${REGEX_ALIAS-}
volumes:
- mta:/srv
- app-spam:/var/lib/kopano/spamd # kopano-spamd integration
- /etc/localtime:/etc/localtime:ro # Use host timezone
cap_add: # helps debugging by allowing strace
- sys_ptrace
flt:
image: mlan/rspamd
networks:
- backend
ports:
- "127.0.0.1:11334:11334" # HTML rspamd WebGui
depends_on:
- mta
environment: # Virgin config, ignored on restarts unless FORCE_CONFIG given.
- WORKER_CONTROLLER=enable_password="${FLT_PASSWD-secret}";
- METRICS=${FLT_METRIC}
- CLASSIFIER_BAYES=${FLT_BAYES}
- MILTER_HEADERS=${FLT_HEADERS}
- DKIM_DOMAIN=${MAIL_DOMAIN-example.com}
- DKIM_SELECTOR=${DKIM_SELECTOR-default}
- SYSLOG_LEVEL=${SYSLOG_LEVEL-}
- LOGGING=level="${FLT_LOGGING-error}";
volumes:
- flt:/srv
- app-spam:/var/lib/kopano/spamd # kopano-spamd integration
- /etc/localtime:/etc/localtime:ro # Use host timezone
cap_add: # helps debugging by allowing strace
- sys_ptrace
db:
image: mariadb
command: ['--log_warnings=1']
networks:
- backend
environment:
- LANG=C.UTF-8
- MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD-secret}
- MYSQL_DATABASE=${MYSQL_DATABASE-kopano}
- MYSQL_USER=${MYSQL_USER-kopano}
- MYSQL_PASSWORD=${MYSQL_PASSWORD-secret}
volumes:
- db:/var/lib/mysql
- /etc/localtime:/etc/localtime:ro # Use host timezone
auth:
image: mlan/openldap
networks:
- backend
command: --root-cn ${AD_ROOT_CN-admin} --root-pw ${AD_ROOT_PW-secret}
environment:
- LDAPBASE=${AD_BASE-dc=example,dc=com}
- LDAPDEBUG=${AD_DEBUG-parse}
volumes:
- auth:/srv
- /etc/localtime:/etc/localtime:ro # Use host timezone
networks:
backend:
volumes:
app-atch:
app-conf:
app-spam:
app-sync:
auth:
db:
mta:
flt:
This repository contains a demo directory which hold the docker-compose.yml file as well as a Makefile which might come handy. Start with cloning the github repository.
git clone https://github.com/mlan/docker-postfix.git
From within the demo directory you can start the containers by typing:
make init
Then you can assess WebApp on the URL http://localhost:8008
and log in with the user name demo
and password demo
.
make web
You can send yourself a test email by typing:
make test
When you are done testing you can destroy the test containers by typing
make destroy
By default, docker will store the configuration and run data within the container. This has the drawback that the configurations and queued and quarantined mail are lost together with the container should it be deleted. It can therefore be a good idea to use docker volumes and mount the run directories and/or the configuration directories there so that the data will survive a container deletion.
To facilitate such approach, to achieve persistent storage, the configuration and run directories of the services has been consolidated to /srv/etc
and /srv/var
respectively. So if you to have chosen to use both persistent configuration and run data you can run the container like this:
docker run -d --name mta -v mta:/srv -p 127.0.0.1:25:25 mlan/postfix
When you start a container which creates a new volume, as above, and the container has files or directories in the directory to be mounted (such as /srv/
above), the directory’s contents are copied into the volume. The container then mounts and uses the volume, and other containers which use the volume also have access to the pre-populated content. More details here.
The mlan/postfix
image contains an elaborate configuration / seeding procedure. The configuration is controlled by environment variables, described below.
The seeding procedure will leave any existing configuration untouched. This is achieved by the using an unlock file: DOCKER_UNLOCK_FILE=/srv/etc/.docker.unlock
.
During the image build this file is created. When the the container is started the configuration / seeding procedure will be executed if the DOCKER_UNLOCK_FILE
can be found. Once the procedure completes the unlock file is deleted preventing the configuration / seeding procedure to run when the container is restarted.
The unlock file approach was selected since it is difficult to accidentally create a file.
In the rare event that want to modify the configuration of an existing container you can override the default behavior by setting FORCE_CONFIG=OVERWRITE
to a no-empty string.
When you create the mlan/postfix
container, you can configure the services by passing one or more environment variables or arguments on the docker run command line. Once the services has been configured a lock file is created, to avoid repeating the configuration procedure when the container is restated.
To see all available Postfix configuration variables you can run postconf
within the container, for example like this:
docker-compose exec mta postconf
If you do, you will notice that configuration variable names are all lower case, but they will be matched with all uppercase environment variables by the container initialization scripts.
Similarly Dovecot configuration variables can be set. One difference is that, to avoid name clashes, the variables are prefixed by DOVECOT_PREFIX=DOVECOT_
. You can list all Dovecot variables by typing:
docker-compose exec mta doveconf
Postfix communicates with external applications like mail filters (Milters), providing spam filtering, using the Milter protocol, which is similar to SMTP.
Rspamd is a fast, free and open-source spam filtering system, which has been tested with mlan/postfix
. The docker-postfix repository provides a dockerized version of the Rspamd mail filter.
Communication with the Rspamd milter is configured by setting SMTPD_MILTERS=inet:flt:11332
, which assumes that a Rspamd container, named flt
, is reachable on the custom network.
The milter_default_action parameter specifies how Postfix handles Milter application errors. You can set MILTER_DEFAULT_ACTION=accept
to proceed as if the mail filter was not present, when there are errors.
Sometimes you want outgoing email to be sent to a SMTP relay and not directly to its destination. This could for instance be when your ISP is blocking port 25 or perhaps if you have a dynamic IP and are afraid of that mail servers will drop your outgoing emails because of that.
This environment variable simplify a SMTP relay configuration. The SMTP relay host might require SASL authentication in which case user name and password can also be given in variable. The format is "host:port user:passwd"
. Example: SMTP_RELAY_HOSTAUTH="[example.relay.com]:587 e863ac2bc1e90d2b05a47b2e5c69895d:b35266f99c75d79d302b3adb42f3c75f"
You can enforce the use of TLS, so that the Postfix SMTP server announces STARTTLS and accepts no
mail without TLS encryption, by setting SMTP_TLS_SECURITY_LEVEL=encrypt
. Default: SMTP_TLS_SECURITY_LEVEL=none
.
To configure the Postfix SMTP client connecting using the legacy SMTPS protocol instead of using the STARTTLS command, set SMTP_TLS_WRAPPERMODE=yes
. This mode requires SMTP_TLS_SECURITY_LEVEL=encrypt
or stronger. Default: SMTP_TLS_WRAPPERMODE=no
PostSRSd, implementing a sender rewriting scheme (SRS), offer optional forwarding rewrite to avoid receiving servers flagging messages as spam.
Postfix achieves client authentication using SASL provided by Dovecot. Client authentication is the mechanism that is used on SMTP relay using SASL authentication, see the SMTP_RELAY_HOSTAUTH
. Here the client authentication is arranged on the smtps port: 465 and submission port: 587.
To avoid the risk of being an open relay the SMTPS and submission (MSA) services are only activated when at least one SASL method has activated. Four methods are supported; LDAP, MySQL, IMAP and password file. Any combination of methods can simultaneously be active. If more than one method is active, all authentication methods are attempted one after another.
A method is activated when its required variables has been defined. For LDAP, LDAP_QUERY_ATTRS_PASS
is needed in addition to the LDAP variables discussed in LDAP mailbox lookup. MySQL needs MYSQL_QUERY_PASS
in addition to the MySQL variables discussed in MySQL mailbox lookup. And IMAP needs the SMTPD_SASL_IMAPHOST
variable and password file require SMTPD_SASL_CLIENTAUTH
.
Additionally clients are required to authenticate using TLS to avoid password being sent in the clear. The configuration of the services are the similar with the exception that the SMTPS service uses the legacy SMTPS protocol; SMTPD_TLS_WRAPPERMODE=yes
, whereas the submission service uses the STARTTLS protocol.
There are unavoidable limitations with non-plaintext authentication mechanisms and password storage schemes. If more than one non-plaintext authentication mechanism, e.g. CRAM-MD5, are enabled then the passwords must be stored in plain text.
You can list clients and their passwords in a space separated string using the format: "username:{scheme}passwd"
. Example: SMTPD_SASL_CLIENTAUTH="client1:{plain}passwd1 client2:{plain}passwd2"
. For security you might want to use encrypted passwords. One way to encrypt a password ({plain}secret
) is by running
docker exec -it mta doveadm pw -p secret
{CRYPT}$2y$05$Osj5ebALV/bXo18H4BKLa.J8Izn23ilI8TNA/lIHz92TuQFbZ/egK
for use in SMTPD_SASL_CLIENTAUTH
.
Using LDAP with authentication binds, Dovecot, binds, using the SMTPS client credentials, to the LDAP server which that verifies the them. See LDAP for more details.
The LDAP client configurations described in LDAP mailbox lookup are also used here. In addition to these, the binding <user>
attribute needs to be specified using LDAP_QUERY_ATTRS_PASS
. The <user>
attribute is defined in this way LDAP_QUERY_ATTRS_PASS=<user>=user
. To exemplify, if uid
is the desired <user>
attribute define LDAP_QUERY_ATTRS_PASS=uid=user
.
Dovecot sends a LDAP request defined by LDAP_QUERY_FILTER_PASS
to lookup the DN that will be used for the authentication bind. Example: LDAP_QUERY_FILTER_PASS=(&(objectclass=posixAccount)(uid=%u))
.
LDAP_QUERY_FILTER_PASS
can be omitted in which case the filter is being reconstructed from LDAP_QUERY_FILTER_USER
. The reconstruction tries to replace the string (mail=%s)
in LDAP_QUERY_FILTER_USER
with (<user>=%u),
where <user>
is taken from LDAP_QUERY_ATTRS_PASS
. Example: LDAP_QUERY_FILTER_USER=(&(objectclass=posixAccount)(mail=%s))
and LDAP_QUERY_ATTRS_PASS=uid=user
will result in this filter (&(objectclass=posixAccount)(uid=%u))
.
Dovecot, can authenticate users against a remote IMAP server (RIMAP). For this to work it is sufficient to provide the address of the IMAP host, by using SMTPD_SASL_IMAPHOST
. Examples SMTPD_SASL_IMAPHOST=app
, SASL_IMAP_HOST=192.168.1.123:143
.
For more details see Authentication via remote IMAP server.
Postfix is configured to be
the final destination of the virtual/hosted domains defined by the environment variable MAIL_DOMAIN
. If the domains are not properly configured Postfix will be rejecting the emails. When multiple domains are used the first domain in the list is considered to be the primary one.
The default value of MAIL_DOMAIN=$(hostname -d)
is to
use the host name of the container minus the first component. So you can either use the environment variable MAIL_DOMAIN
or the argument --hostname
. So for example, --hostname mx1.example.com
or -e MAIL_DOMAIN="example.com secondary.com"
.
Transport Layer Security (TLS, formerly called SSL) provides certificate-based authentication and encrypted sessions. An encrypted session protects the information that is transmitted with SMTP mail or with SASL authentication.
Here TLS is activated for inbound messages when either SMTPD_TLS_CHAIN_FILES
or SMTPD_TLS_CERT_FILE
(or its DSA and ECDSA counterparts) is not empty or SMTPD_USE_TLS=yes
. The Postfix SMTP server generally needs a certificate and a private key to provide TLS. Both must be in PEM format. The private key must not be encrypted, meaning: the key must be accessible without a password. The RSA certificate and a private key files are identified by SMTPD_TLS_CERT_FILE
and SMTPD_TLS_KEY_FILE
.
If SMTPD_USE_TLS=yes
is explicitly defined but there are no certificate files defined, a self-signed certificate will be generated when the container is created.
Specifies the RSA PEM certificate file within the container to be used with incoming TLS connections. The certificate file need to be made available in the container by some means. Example SMTPD_TLS_CERT_FILE=cert.pem
. Additionally there are the DSA, ECDSA or chain counterparts; SMTPD_TLS_DCERT_FILE
, SMTPD_TLS_ECCERT_FILE
and SMTPD_TLS_CHAIN_FILES
.
Specifies the RSA PEM private key file within the container to be used with incoming TLS connections. The private key file need to be made available in the container by some means. Example SMTPD_TLS_KEY_FILE=key.pem
. Additionally there are the DSA, ECDSA or chain counterparts; SMTPD_TLS_DKEY_FILE
, SMTPD_TLS_ECKEY_FILE
and SMTPD_TLS_CHAIN_FILES
.
The term "Forward Secrecy" (or sometimes "Perfect Forward Secrecy") is used to describe security protocols in which the confidentiality of past traffic is not compromised when long-term keys used by either or both sides are later disclosed.
Forward secrecy is accomplished by negotiating session keys using per-session cryptographically-strong random numbers that are not saved, and signing the exchange with long-term authentication keys. Later disclosure of the long-term keys allows impersonation of the key holder from that point on, but not recovery of prior traffic, since with forward secrecy, the discarded random key agreement inputs are not available to the attacker.
The built in utility script run
can be used to generate the Diffie-Hellman parameters needed for forward secrecy.
docker exec -it mta run postfix_update_dhparam
Let’s Encrypt provide free, automated, authorized certificates when you can demonstrate control over your domain. Automatic Certificate Management Environment (ACME) is the protocol used for such demonstration. There are many agents and applications that supports ACME, e.g., certbot. The reverse proxy Traefik also supports ACME.
The mlan/postfix
image looks for a file ACME_FILE=/acme/acme.json
at container startup and every time this file changes certificates within this file are extracted. If the host or domain name of one of those certificates matches HOSTNAME=$(hostname)
or DOMAIN=${HOSTNAME#*.}
it will be used for TLS support.
Once the certificates and keys have been updated, we run the command in the environment variable ACME_POSTHOOK="postfix reload"
. Postfix's parameters needs to be reloaded to update the LTS parameters. If such automatic reloading is not desired, set ACME_POSTHOOK=
to empty.
So reusing certificates from Traefik will work out of the box if the /acme
directory in the Traefik container is also mounted in the mlan/postfix
container.
docker run -d -name mta -v proxy-acme:/acme:ro mlan/postfix
Note, if the target certificate Common Name (CN) or Subject Alternate Name (SAN) is changed the container needs to be restarted.
Moreover, do not set SMTPD_TLS_CERT_FILE
and/or SMTPD_TLS_KEY_FILE
when using ACME_FILE
.
When Postfix receives an message it uses mailbox maps to lookup the recipient's mailbox-path/username. If successful the message is accepted. Whether what the lookup returns is used as a mailbox-path or a username depends on if the messages will be delivered to a local mailbox or is transported for delivery elsewhere. See delivery transport and mail boxes for an overview on delivery methods.
So one can imagine situations where Postfix is set up to lookup and pass on a username that is different from what dovecot is expecting when performing authentication. Using DOVECOT_AUTH_USERNAME_FORMAT=%Ln
Dovecot can be made to drop the domain part, if present, from the supplied username, see Dovecot core settings for details.
Postfix can use a table as a source for any of its lookups including virtual mailbox and aliases. The mlan/postfix
image provides a simple way to generate virtual mailbox lookup using the MAIL_BOXES
and MAIL_ALIASES
environment variables.
The MAIL_BOXES
environment variable (empty by default) hold a space separated list of addresses and their mailboxes using the following syntax: MAIL_BOXES="address address:mailbox"
. The mailbox will have the same name as the address if it is not explicitly given.
Using the MAIL_BOXES
environment variable you simply provide a space separated list with all email addresses that Postfix should accept incoming mail to. For example: MAIL_BOXES="[email protected] [email protected]"
.
The mailbox path is separated from the address by a colon :
, like so; MAIL_BOXES="[email protected]:receiver/inbox [email protected]:example.com/info/"
.
Mail is stored either in mbox or maildir format. The mbox format is used unless the mailbox path ends with /
in which case maildir format is used.
Using the MAIL_ALIASES
environment variable you simply provide a space separated list with email alias addresses that Postfix should accept incoming mail to, using the following syntax: MAIL_ALIASES="alias:address alias:address,address"
. For example: MAIL_ALIASES="root:info,[email protected] postmaster:root"
. The default value is empty.
Postfix can use an LDAP directory as a source for any of its lookups including virtual mailbox and aliases.
For LDAP mailbox lookup to work LDAP_HOST
, LDAP_USER_BASE
and LDAP_QUERY_FILTER_USER
need to be configured. LDAP can also be used for alias lookup, in which case use LDAP_QUERY_FILTER_ALIAS
. In addition LDAP can be used to lookup mail groups using LDAP_QUERY_FILTER_GROUP
and LDAP_QUERY_FILTER_EXPAND
. For detailed explanation see LDAP client configuration.
If the LDAP server is not configured to allow anonymous queries, you use LDAP_BIND_DN
and LDAP_BIND_PW
to provide LDAP user and password to be used for the queries.
Use LDAP_HOST
to configure the connection to the LDAP server. When the default port (389) is used just providing the server name is often sufficient. You can also use full URL or part thereof, for example: LDAP_HOST=auth
, LDAP_HOST=auth:389
, LDAP_HOST=ldap://ldap.example.com:1444
.
The LDAP_USER_BASE
, is the base DNs at which to conduct the searches for users. Example: LDAP_USER_BASE=ou=people,dc=example,dc=com
.
This is the filter used to search the directory, where %s
is a
substitute for the address Postfix is trying to resolve. Example, only consider the email address of users who also have objectclass=posixAccount
; LDAP_QUERY_FILTER_USER=(&(objectclass=posixAccount)(mail=%s))
.
As mentioned in mailbox maps and authentication what the LDAP lookup returns can be used as a mailbox-path or a username depending on if the messages will be delivered to a local mailbox or is transported for delivery elsewhere. The default attribute to return is LDAP_QUERY_ATTRS_USER=mail
. Use this variable if another attribute is to be returned.
The LDAP_GROUP_BASE
is the base DNs at which to conduct the searches for groups. Example: LDAP_GROUP_BASE=ou=groups,dc=example,dc=com
.
This is the filter used to search the directory, where %s
is a
substitute for the address Postfix is trying to resolve. Example, only consider email aliases of users who also have objectclass=posixAccount
; LDAP_QUERY_FILTER_ALIAS=(&(objectclass=posixAccount)(aliases=%s))
.
To deliver mails to a member of a group the email addresses of the individual must be resolved. For resolving group members use LDAP_QUERY_FILTER_GROUP
and to expand group members’ mail into uid
use LDAP_QUERY_FILTER_EXPAND
.
Example, only consider group mail from group who is of objectclass=group
: LDAP_QUERY_FILTER_GROUP=(&(objectclass=group)(mail=%s))
and then only consider user with matching uid
who is of objectclass=posixAccount
; LDAP_QUERY_FILTER_EXPAND=(&(objectclass=posixAccount)(uid=%s))
.
The defaults for these environment variables are empty. If you do have to bind, do it with this distinguished name and password. Example: LDAP_BIND_DN=uid=admin,dc=example,dc=com
, LDAP_BIND_PW=secret
.
Postfix can use an MySQL database as a source for any of its lookups including virtual mailbox and aliases.
For MySQL mailbox lookup to work MYSQL_HOST
, MYSQL_DATABASE
and MYSQL_QUERY_USER
need to be configured. MySQL can also be used for alias lookup, in which case use MYSQL_QUERY_ALIAS
. For detailed explanation see MySQL client configuration.
If the MySQL server is not configured to allow password less queries, you use MYSQL_USER
and MYSQL_PASSWORD
to provide authentication credentials for the queries.
Use MYSQL_HOST
to configure the connection to the MySQL server. When the default port (3306) is used just providing the server name is often sufficient. You can also use full URL or part thereof, for example: MYSQL_HOST=db
or MYSQL_HOST=db:3306
.
The MYSQL_DATABASE
, is the database on which to conduct the searches for users. Example: MYSQL_DATABASE=postfix
.
The MYSQL_QUERY_USER
query is used to lookup the recipient,
where %s
is a substitute for the address Postfix is trying to resolve.
To exemplify, lets assume that the table users
within the database postfix
is structured like this:
+----+----------+---------------------------------------------+----------------------+
| id | userid | password | mail |
+----+----------+---------------------------------------------+----------------------+
| 1 | receiver | {PLAIN-MD5}5ebe2294ecd0e0f08eab7690d2a6ee69 | receiver@example.com |
| 2 | office1 | {PLAIN-MD5}7c6a180b36896a0a8c02787eeafb0e4c | NULL |
+----+----------+---------------------------------------------+----------------------+
We can use the following query to find the recipient that matches the mail address being resolved:
MYSQL_QUERY_USER="select mail from users where mail='%s' limit 1;"
.
The MYSQL_QUERY_ALIAS
query is used to retrieve aliases from the database, where %s
is a
substitute for the address Postfix is trying to resolve.
Use MYSQL_USER
and MYSQL_PASSWORD
to provide authentication credentials for MySQL queries.
Example: MYSQL_USER=admin
, MYSQL_PASSWORD=secret
. These environment variables are empty by fault.
As mentioned in incoming SMTPS and submission client authentication Dovecot needs the MYSQL_QUERY_PASS
to be defined to be able to lookup the user and password when performing authentication. The following would work with the users
table shown above MYSQL_QUERY_PASS="select password, userid as user from $(SQL_TAB) where userid = '%u'"
. See Dovecot MySQL authentication for details.
The recipient email address can be rewritten using regular expressions in REGEX_ALIAS
. This can be useful in some situations.
For example, assume you want email addresses like [email protected]
and [email protected]
to be forwarded to [email protected]
. This can be achieved by setting REGEX_ALIAS='/([^+]+)[+-].*@(domain.com)/ $1@$2'
. The user can now, with the mail client, arrange filters to sort email into sub folders.
The mlan/postfix
image is designed primarily to work with companion software, like Kolab, Kopano or Zimbra which will hold the mail boxes. That is, often received messages are transported for final delivery. Local Mail Transfer Protocol (LMTP) is one such transport mechanism. Nonetheless, if no transport mechanism is specified messages will be delivered to local mail boxes.
The environment variable VIRTUAL_TRANSPORT
specifies how messages will be transported for final delivery. Frequently the server taking final delivery listen to LMTP. Assuming it does so on port 2003 it is sufficient to set VIRTUAL_TRANSPORT=lmtp:app:2003
to arrange the transport.
If VIRTUAL_TRANSPORT
is not defined local mail boxes will be managed by Postfix directly. The local mail boxes will be created in the directory /var/mail
. For example /var/mail/[email protected]
. See MAIL_BOXES
for details on mailbox paths.
The mlan/postfix
image include the Dovecot, a secure IMAP server, which can also manage mail boxes. Setting VIRTUAL_TRANSPORT=lmtp:unix:private/transport
will transport messages to dovecot which will arrange local mailboxes. The environment variable DOVECOT_MAIL_LOCATION
can be used to set the mailbox location template. Since Dovecot serves both IMAP and POP3 these mailboxes can be accessed by remote mail clients if desired.
The table below is provided to give an overview of the options discussed here.
VIRTUAL_TRANSPORT |
Final delivery |
---|---|
= |
Postfix local mailbox /var/mail/[email protected] |
=lmtp:app:2003 |
External LMTP host app take delivery |
=lmtp:unix:private/transport |
Dovecot local mailbox /var/mail/user/inbox , with IMAP and POP3 access |
When Dovecot manages the mail boxes, see VIRTUAL_TRANSPORT
, mail clients can retrieve messages using both the IMAP and POP3 protocols. Dovecot will use TLS certificates that have been made available to Postfix, in which case IMAPS and POP3S connections will be possible, see Incoming TLS support.
By default Dovecot refuses plain text authentication unless within a secure TLS connection. Sometimes, perhaps for testing, you want to enable plain text authentication for non-secure IMAP or POP3 connections. if so set DOVECOT_DISABLE_PLAINTEXT_AUTH=no
.
The maximal size in bytes of a message, including envelope information. Default: MESSAGE_SIZE_LIMIT=10240000
~10MB. Many mail servers are configured with maximal size of 10MB, 20MB or 25MB.
The level of output for logging is in the range from 0 to 7. The default is: SYSLOG_LEVEL=5
emerg | alert | crit | err | warning | notice | info | debug |
---|---|---|---|---|---|---|---|
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Here some topics relevant for arranging a mail server are presented.
The Domain Name System (DNS) is a hierarchical and decentralized naming system for computers, services, or other resources connected to the Internet or a private network.
A mail exchange record (MX record) specifies the mail server responsible for accepting email messages on behalf of a domain name. It is a resource record in the DNS. The MX record should correspond to the host name of the image.
Here some implementation details are presented.
The container use runit, providing an init scheme and service supervision, allowing multiple services to be started. There is a Gentoo Linux runit wiki.
When the container is started, execution is handed over to the script docker-entrypoint.sh
. It has 4 stages; 0) register the SIGTERM signal (IPC) handler, which is programmed to run all exit scripts in /etc/docker/exit.d/
and terminate all services, 1) run all entry scripts in /etc/docker/entry.d/
, 2) start services registered in SVDIR=/etc/service/
, 3) wait forever, allowing the signal handler to catch the SIGTERM and run the exit scripts and terminate all services.
The entry scripts are responsible for tasks like, seeding configurations, register services and reading state files. These scripts are run before the services are started.
There is also exit script that take care of tasks like, writing state files. These scripts are run when docker sends the SIGTERM signal to the main process in the container. Both docker stop
and docker kill --signal=TERM
sends SIGTERM.
The entry and exit scripts, discussed above, as well as other utility scrips are copied to the image during the build phase. The source file tree was designed to facilitate simple scanning, using wild-card matching, of source-module directories for files that should be copied to image. Directory names indicate its file types so they can be copied to the correct locations. The code snippet in the Dockerfile
which achieves this is show below.
COPY src/*/bin $DOCKER_BIN_DIR/
COPY src/*/entry.d $DOCKER_ENTRY_DIR/
There is also a mechanism for excluding files from being copied to the image from some source-module directories. Source-module directories to be excluded are listed in the file .dockerignore
. Since we don't want files from the module notused
we list it in the .dockerignore
file:
src/notused