Uni-Sync : A Synchronization Tool for Lian Li Fan Controllers

This tool allows you to configure the synchronization settings for Uni Fan controllers on any OS. No more booting into Windows to enable PWM or ARGB synchronization.

• Enable/Disable Motherboard PWM Sync
• Enable/Disable LED ARGB Header Sync
• Manually Set Fan Speeds

Packaging Status

Linux

Distribution	Status
Fedora

Device Support

Device	PID	Status	Set Fan RPM	Set PWM Sync	Set ARGB Sync
LianLi-UNI SL	7750, a100	Supported	✔️	✔️	✔️
LianLi-UNI AL	a101	Untested	✔️	✔️	✔️
LianLi-UNI SL-Infinity	a102	Supported	✔️	✔️	✔️
LianLi-UNI SL v2	a103, a105	Untested	✔️	✔️	✔️
LianLi-UNI AL v2	a104	Untested	✔️	✔️	✔️

Installation

Uni-Sync requires Rust to build. Please install before proceeding.

Windows

Run install.bat. This will build the application and move it into %APPDATA%\Local\uni-sync. Added to startup.

Linux

Fedora

- sudo dnf copr enable nezia/uni-sync 
- sudo dnf install uni-sync

Manual installation

1. Clone the repository.
2. Run install.sh. Please note, this will set up a service named uni-sync and will execute once on system startup.

Configuration

Uni-Sync will generate a uni-sync.json configuration file in your operating system conventional configuration directory.

Windows: %PROGRAMDATA%\uni-sync\uni-sync.json

Linux: /etc/uni-sync/uni-sync.json

This file will contain an autogenerated configuration profile for each controller attached to the system:

{
  "configs": [
    {
      "device_id": "VID:3314/PID:41216/SN:624314930",
      "sync_rgb": false,
      "channels": [
        // Channel 1
        {
          "mode": "Manual",
          "speed": 50
        },
        // Channel 2
        {
          "mode": "Manual",
          "speed": 50
        },
        // Channel 3
        {
          "mode": "Manual",
          "speed": 50
        },
        // Channel 4
        {
          "mode": "PWM",
          "speed": 50
        }
      ]
    }
  ]
}

The following options can be configured:

Configuration	Description	Type	Options
"sync_rgb": false	Enable/Disables ARGB header sync	bool	true or false
"method": "Manual"	PWM to enable PWM sync. Manual to set speed.	string	PWM or Manual
"speed": 50	Fan speed as percentage (1-100)	int	1-100

Removal

This will backup the uni-sync.json file before removing.

Windows

Run uninstall.bat

Linux

Run uninstall.sh