Complete UCLA miniscope V4 supporti

- Tested on OEPS miniscope V4.4
- To finalize this, we must test on a large batch of scopes to ensure
  functionality of all features and reliablity of datastream

OpenEphys.Onix1/Bno055DataFrame.cs

@@ -5,7 +5,8 @@
 namespace OpenEphys.Onix1
 {
     /// <summary>
-    /// A class that contains 3D orientation data produced by a Bosch BNO055 9-axis inertial measurement unit (IMU).
+    /// A class that contains 3D orientation data produced by a Bosch BNO055 9-axis inertial measurement unit
+    /// (IMU).
     /// </summary>
     public class Bno055DataFrame : DataFrame
     {
@@ -51,14 +52,14 @@ internal unsafe Bno055DataFrame(ulong clock, Bno055DataPayload* payload)
         /// <summary>
         /// Gets the 3D orientation in Euler angle format with units of degrees.
         /// </summary>
-        /// <remark>
+        /// <remarks>
         /// The Tait-Bryan formalism is used:
         /// <list type="bullet">
         /// <item><description>Yaw: 0 to 360 degrees.</description></item>
         /// <item><description>Roll: -180 to 180 degrees</description></item>
         /// <item><description>Pitch: -90 to 90 degrees</description></item>
         /// </list>
-        /// </remark>
+        /// </remarks>
         public Vector3 EulerAngle { get; }
 
         /// <summary>

OpenEphys.Onix1/ConfigureUclaMiniscopeV4.cs

@@ -4,25 +4,56 @@
 
 namespace OpenEphys.Onix1
 {
+    /// <summary>
+    /// Configures a UCLA Miniscope V4 on the specified port.
+    /// </summary>
+    /// <remarks>
+    /// The UCLA Miniscope V4 is a e miniaturized fluorescent microscope for performing single-photon calcium
+    /// imaging in freely moving animals. It has the following features:
+    /// <list type="bullet">
+    /// <item><description>A Python-480 0.48 Megapixel CMOS image sensor.</description></item>
+    /// <item><description>A BNO055 9-axis IMU for real-time, 3D orientation tracking.</description></item>
+    /// <item><description>An electrowetting lens for remote focal plane adjustment.</description></item>
+    /// <item><description>An excitation LED with adjustable brightness control and optional exposure-driven
+    /// interleaving to reduce photobleaching.</description></item>
+    /// </list>
+    /// </remarks>
     public class ConfigureUclaMiniscopeV4 : MultiDeviceFactory
     {
         PortName port;
         readonly ConfigureUclaMiniscopeV4PortController PortControl = new();
 
+        /// <summary>
+        /// Initialize a new instance of a <see cref="ConfigureUclaMiniscopeV4"/> class.
+        /// </summary>
         public ConfigureUclaMiniscopeV4()
         {
             Port = PortName.PortA;
             PortControl.HubConfiguration = HubConfiguration.Passthrough;
         }
 
+        /// <summary>
+        /// Gets or sets the Miniscope camera configuration.
+        /// </summary>
         [Category(DevicesCategory)]
         [TypeConverter(typeof(SingleDeviceFactoryConverter))]
         public ConfigureUclaMiniscopeV4Camera Camera { get; set; } = new();
 
+        /// <summary>
+        /// Gets or sets the Bno055 9-axis inertial measurement unit configuration.
+        /// </summary>
         [Category(DevicesCategory)]
         [TypeConverter(typeof(SingleDeviceFactoryConverter))]
         public ConfigureUclaMiniscopeV4Bno055 Bno055 { get; set; } = new();
 
+        /// <summary>
+        /// Gets or sets the port.
+        /// </summary>
+        /// <remarks>
+        /// The port is the physical connection to the ONIX breakout board and must be specified prior to operation.
+        /// </remarks>
+        [Description("Specifies the physical connection of the miniscope to the ONIX breakout board.")]
+        [Category(ConfigurationCategory)]
         public PortName Port
         {
             get { return port; }
@@ -36,9 +67,26 @@ public PortName Port
             }
         }
 
+        /// <summary>
+        /// Gets or sets the port voltage override.
+        /// </summary>
+        /// <remarks>
+        /// <para>
+        /// If defined, it will override automated voltage discovery and apply the specified voltage to the miniscope.
+        /// If left blank, an automated headstage detection algorithm will attempt to communicate with the miniscope and
+        /// apply an appropriate voltage for stable operation. Because ONIX allows any coaxial tether to be used, some of
+        /// which are thin enough to result in a significant voltage drop, its may be required to manually specify the
+        /// port voltage.
+        /// </para>
+        /// <para>
+        /// Warning: this device requires 5.0V to 6.0V, measured at the miniscope, for proper operation. Supplying higher
+        /// voltages may result in damage.
+        /// </para>
+        /// </remarks>
         [Description("If defined, it will override automated voltage discovery and apply the specified voltage" +
-                     "to the headstage. Warning: this device requires 5.0V to 6.0V for proper operation." +
-                     "Supplying higher voltages may result in damage to the headstage.")]
+                     "to the miniscope. Warning: this device requires 5.0V to 6.0V for proper operation." +
+                     "Supplying higher voltages may result in damage to the miniscope.")]
+        [Category(ConfigurationCategory)]
         public double? PortVoltage
         {
             get => PortControl.PortVoltage;

OpenEphys.Onix1/ConfigureUclaMiniscopeV4Bno055.cs

@@ -3,17 +3,41 @@
 
 namespace OpenEphys.Onix1
 {
+    /// <summary>
+    /// Configures the Bno055 inertial measurement unit (IMU) on a UCLA Miniscope V4.
+    /// </summary>
     public class ConfigureUclaMiniscopeV4Bno055 : SingleDeviceFactory
     {
+        /// <summary>
+        /// Initialize a new instance of a <see cref="ConfigureUclaMiniscopeV4Bno055"/> class.
+        /// </summary>
         public ConfigureUclaMiniscopeV4Bno055()
             : base(typeof(UclaMiniscopeV4Bno055))
         {
         }
 
+        /// <summary>
+        /// Gets or sets the device enable state.
+        /// </summary>
+        /// <remarks>
+        /// If set to true, <see cref="UclaMiniscopeV4Bno055Data"/> will produce data. If set to false, 
+        /// <see cref="UclaMiniscopeV4Bno055Data"/> will not produce data.
+        /// </remarks>
         [Category(ConfigurationCategory)]
         [Description("Specifies whether the BNO055 device is enabled.")]
         public bool Enable { get; set; } = true;
 
+        /// <summary>
+        /// Configures the Bno055 inertial measurement unit (IMU) on a UCLA Miniscope V4.
+        /// </summary>
+        /// <remarks>
+        /// This will schedule configuration actions to be applied by a <see cref="StartAcquisition"/> node
+        /// prior to data acquisition.
+        /// </remarks>
+        /// <param name="source">A sequence of <see cref="ContextTask"/> instances that holds all configuration actions.</param>
+        /// <returns>
+        /// The original sequence but with each <see cref="ContextTask"/> instance now containing configuration actions required to use the miniscope's Bno055 IMU.
+        /// </returns>
         public override IObservable<ContextTask> Process(IObservable<ContextTask> source)
         {
             var enable = Enable;
@@ -25,7 +49,7 @@ public override IObservable<ContextTask> Process(IObservable<ContextTask> source
                 var device = context.GetPassthroughDeviceContext(deviceAddress, typeof(DS90UB9x));
                 ConfigureDeserializer(device);
                 ConfigureBno055(device);
-                var deviceInfo = new DeviceInfo(context, DeviceType, deviceAddress);
+                var deviceInfo = new UclaMiniscopeV4Bno055DeviceInfo(context, DeviceType, deviceAddress, enable);
                 return DeviceManager.RegisterDevice(deviceName, deviceInfo);
             });
         }
@@ -66,4 +90,15 @@ public NameConverter()
             }
         }
     }
+
+    class UclaMiniscopeV4Bno055DeviceInfo : DeviceInfo
+    {
+        public UclaMiniscopeV4Bno055DeviceInfo(ContextTask context, Type deviceType, uint deviceAddress, bool enable)
+            : base(context, deviceType, deviceAddress)
+        {
+            Enable = enable;
+        }
+
+        public bool Enable { get; }
+    }
 }