Add Muneer transposition model

docs/sphinx/source/reference/irradiance/transposition.rst

@@ -15,4 +15,5 @@ Transposition models
    irradiance.klucher
    irradiance.reindl
    irradiance.king
+   irradiance.muneer
    irradiance.ghi_from_poa_driesse_2023

docs/sphinx/source/whatsnew/v0.11.1.rst

@@ -30,6 +30,10 @@ Enhancements
 * Added function for calculating wind speed at different heights,
   :py:func:`pvlib.atmosphere.windspeed_powerlaw`.
   (:issue:`2118`, :pull:`2124`)
+* Added function for determine sky diffuse irradiance on a tilted surface
+  using the Muneer model,
+  :py:func:`pvlib.irradiance.muneer`.
+  (:issue:`2117`, :pull:`2184`)
 
 Bug fixes
 ~~~~~~~~~
@@ -71,4 +75,3 @@ Contributors
 * Jose Meza (:ghuser:`JoseMezaMendieta`)
 * Bernat Nicolau (:ghuser:`BernatNicolau`)
 * Eduardo Sarquis (:ghuser:`EduardoSarquis`)
-

pvlib/irradiance.py

@@ -263,7 +263,7 @@ def get_total_irradiance(surface_tilt, surface_azimuth,
                          dni, ghi, dhi, dni_extra=None, airmass=None,
                          albedo=0.25, surface_type=None,
                          model='isotropic',
-                         model_perez='allsitescomposite1990'):
+                         model_perez='allsitescomposite1990', b=5.73):
     r"""
     Determine total in-plane irradiance and its beam, sky diffuse and ground
     reflected components, using the specified sky diffuse irradiance model.
@@ -280,6 +280,7 @@ def get_total_irradiance(surface_tilt, surface_azimuth,
         * king
         * perez
         * perez-driesse
+        * muneer
 
     Parameters
     ----------
@@ -309,9 +310,12 @@ def get_total_irradiance(surface_tilt, surface_azimuth,
     model : str, default 'isotropic'
         Irradiance model. Can be one of ``'isotropic'``, ``'klucher'``,
         ``'haydavies'``, ``'reindl'``, ``'king'``, ``'perez'``,
-        ``'perez-driesse'``.
+        ``'perez-driesse'`` and ``'muneer
     model_perez : str, default 'allsitescomposite1990'
         Used only if ``model='perez'``. See :py:func:`~pvlib.irradiance.perez`.
+    b : numeric, default 5.73
+        Used only if ``model='muneer'``.
+        See :py:func:`~pvlib.irradiance.muneer`.
 
     Returns
     -------
@@ -321,9 +325,9 @@ def get_total_irradiance(surface_tilt, surface_azimuth,
 
     Notes
     -----
-    Models ``'haydavies'``, ``'reindl'``, ``'perez'`` and ``'perez-driesse'``
-    require ``'dni_extra'``. Values can be calculated using
-    :py:func:`~pvlib.irradiance.get_extra_radiation`.
+    Models ``'haydavies'``, ``'reindl'``, ``'perez'``, ``'perez-driesse'``,
+    and ``'muneer'`` require ``'dni_extra'``. Values can be calculated
+    using :py:func:`~pvlib.irradiance.get_extra_radiation`.
 
     The ``'perez'`` and ``'perez-driesse'`` models require relative airmass
     (``airmass``) as input. If ``airmass`` is not provided, it is calculated
@@ -333,7 +337,7 @@ def get_total_irradiance(surface_tilt, surface_azimuth,
     poa_sky_diffuse = get_sky_diffuse(
         surface_tilt, surface_azimuth, solar_zenith, solar_azimuth,
         dni, ghi, dhi, dni_extra=dni_extra, airmass=airmass, model=model,
-        model_perez=model_perez)
+        model_perez=model_perez, b=b)
 
     poa_ground_diffuse = get_ground_diffuse(surface_tilt, ghi, albedo,
                                             surface_type)
@@ -346,7 +350,7 @@ def get_sky_diffuse(surface_tilt, surface_azimuth,
                     solar_zenith, solar_azimuth,
                     dni, ghi, dhi, dni_extra=None, airmass=None,
                     model='isotropic',
-                    model_perez='allsitescomposite1990'):
+                    model_perez='allsitescomposite1990', b=5.73):
     r"""
     Determine in-plane sky diffuse irradiance component
     using the specified sky diffuse irradiance model.
@@ -359,6 +363,7 @@ def get_sky_diffuse(surface_tilt, surface_azimuth,
         * king
         * perez
         * perez-driesse
+        * muneer
 
     Parameters
     ----------
@@ -383,9 +388,12 @@ def get_sky_diffuse(surface_tilt, surface_azimuth,
     model : str, default 'isotropic'
         Irradiance model. Can be one of ``'isotropic'``, ``'klucher'``,
         ``'haydavies'``, ``'reindl'``, ``'king'``, ``'perez'``,
-        ``'perez-driesse'``.
+        ``'perez-driesse'``, ``'muneer'``.
     model_perez : str, default 'allsitescomposite1990'
         Used only if ``model='perez'``. See :py:func:`~pvlib.irradiance.perez`.
+    b : numeric, default 5.73
+        Used only if ``model='muneer'``.
+        See :py:func:`~pvlib.irradiance.muneer`.
 
     Returns
     -------
@@ -395,14 +403,15 @@ def get_sky_diffuse(surface_tilt, surface_azimuth,
     Raises
     ------
     ValueError
-        If model is one of ``'haydavies'``, ``'reindl'``, ``'perez'``,  or
-        ``'perez_driesse'`` and ``dni_extra`` is not specified.
+        If model is one of ``'haydavies'``, ``'reindl'``, ``'perez'``,
+        ``'perez_driesse'``, or ``'muneer'`` and ``dni_extra`` is not
+        specified.
 
     Notes
     -----
-    Models ``'haydavies'``, ``'reindl'``, ``'perez'`` and ``'perez-driesse'``
-    require ``'dni_extra'``. Values can be calculated using
-    :py:func:`~pvlib.irradiance.get_extra_radiation`.
+    Models ``'haydavies'``, ``'reindl'``, ``'perez'``, ``'perez-driesse'``
+    and ``'muneer'`` require ``'dni_extra'``. Values can be calculated
+    using :py:func:`~pvlib.irradiance.get_extra_radiation`.
 
     The ``'Perez'`` transposition model features discontinuities in the
     predicted tilted diffuse irradiance due to relying on discrete input
@@ -443,6 +452,9 @@ def get_sky_diffuse(surface_tilt, surface_azimuth,
         # perez_driesse will calculate its own airmass if needed
         sky = perez_driesse(surface_tilt, surface_azimuth, dhi, dni, dni_extra,
                             solar_zenith, solar_azimuth, airmass)
+    elif model == 'muneer':
+        sky = muneer(surface_tilt, surface_azimuth, dhi, ghi, dni_extra,
+                     b, solar_zenith, solar_azimuth)
     else:
         raise ValueError(f'invalid model selection {model}')
 
@@ -994,6 +1006,103 @@ def king(surface_tilt, dhi, ghi, solar_zenith):
     return sky_diffuse
 
 
+def muneer(surface_tilt, surface_azimuth, dhi, ghi, dni_extra, b=5.73,
+           solar_zenith=None, solar_azimuth=None, projection_ratio=None):
+    '''
+    Determine sky diffuse irradiance on a tilted surface using the
+    Muneer model.
+
+    This Muneer transposition model is described in [1]_.
+
+    Parameters
+    ----------
+    surface_tilt : numeric
+        Surface tilt angles in decimal degrees. surface_tilt must be >=0
+        and <=180. The tilt angle is defined as degrees from horizontal
+        (e.g. surface facing up = 0, surface facing horizon = 90)
+
+    surface_azimuth : numeric
+        Surface azimuth angles in decimal degrees. surface_azimuth must
+        be >=0 and <=360. The azimuth convention is defined as degrees
+        east of north (e.g. North = 0, South=180 East = 90, West = 270).
+
+    dhi : numeric
+        Diffuse horizontal irradiance. [W/m^2]
+
+    ghi : numeric
+        Global horizontal irradiance in W/m^2.
+
+    dni_extra : numeric
+        Extraterrestrial normal irradiance in W/m^2.
+
+    b : numeric, default 5.73
+        Radiance distribution index, introduced by Moon and Spencer [2]_
+        to model luminance distribution of overcast sky. [unitless]
+        Recommended values from [1]_:
+
+           - isotropic: b = 0
+           - shaded surface: b = 5.73 (default)
+           - sunlit surface, overcast sky: b = 1.68
+           - sunlit surface, non-overcast sky: b = -0.62
+
+    solar_zenith : numeric
+        Solar apparent (refraction-corrected) zenith angles in decimal
+        degrees. Must supply ``solar_zenith`` and ``solar_azimuth`` or
+        supply ``projection_ratio``.
+
+    solar_azimuth : numeric, optional
+        Solar azimuth angles in decimal degrees. Must supply
+        ``solar_zenith`` and ``solar_azimuth`` or supply
+        ``projection_ratio``.
+
+    projection_ratio : numeric, optional
+        Ratio of angle of incidence projection to solar zenith angle
+        projection. Must supply ``solar_zenith`` and ``solar_azimuth``
+        or supply ``projection_ratio``.
+
+    Returns
+    -------
+    poa_sky_diffuse : numeric
+        In-plane diffuse irradiance from the sky. [W/m^2]
+
+    References
+    ----------
+    .. [1] Muneer, T., 1990. Solar radiation model for Europe. Building
+       Services Engineering Research and Technology 11, 153-163.
+       :doi:`10.1177/014362449001100405`
+
+    .. [2] Moon, P., Spencer, D.E., 1942. Illumination from a non-uniform sky.
+       Trans. Illum. Eng. Soc. (London) 37, 707-725.
+       :doi:`10.1177/096032719302500301`
+    '''
+
+    cos_solar_zenith = tools.cosd(solar_zenith)
+    # if necessary, calculate ratio of titled and horizontal beam irradiance
+    if projection_ratio is None:
+        cos_tt = aoi_projection(surface_tilt, surface_azimuth,
+                                solar_zenith, solar_azimuth)
+        cos_tt = np.maximum(cos_tt, 0)  # GH 526
+        Rb = cos_tt / np.maximum(cos_solar_zenith, 0.01745)  # GH 432
+    else:
+        Rb = projection_ratio
+
+    T_term1 = (1 + tools.cosd(surface_tilt)) * 0.5
+    T_term2 = 2 * b / (np.pi * (3 + 2 * b))
+    T_term3 = (
+        tools.sind(surface_tilt)
+        - np.radians(surface_tilt) * tools.cosd(surface_tilt)
+        - np.pi * (1 - tools.cosd(surface_tilt)) * 0.5
+    )
+    T = T_term1 + T_term2 * T_term3
+
+    horizontal_extra = dni_extra * np.maximum(cos_solar_zenith, 0.01745)
+    F = (ghi - dhi) / horizontal_extra
+
+    sky_diffuse = dhi*(T*(1-F) + F*Rb)
+
+    return sky_diffuse
+
+
 def perez(surface_tilt, surface_azimuth, dhi, dni, dni_extra,
           solar_zenith, solar_azimuth, airmass,
           model='allsitescomposite1990', return_components=False):

pvlib/tests/test_irradiance.py

@@ -286,6 +286,23 @@ def test_perez_driesse(irrad_data, ephem_data, dni_et, relative_airmass):
     assert_series_equal(out, expected, check_less_precise=2)
 
 
+def test_muneer(irrad_data, ephem_data, dni_et):
+    projection_ratio = np.array(
+        [0, 0, 0.8639607552973, 0.1716097049224])
+    out = irradiance.muneer(40, 180, irrad_data['dhi'], irrad_data['ghi'],
+                            dni_et, solar_zenith=ephem_data['apparent_zenith'],
+                            solar_azimuth=ephem_data['azimuth'])
+    out_Rb = irradiance.muneer(40, 180, irrad_data['dhi'], irrad_data['ghi'],
+                               dni_et,
+                               solar_zenith=ephem_data['apparent_zenith'],
+                               projection_ratio=projection_ratio)
+    expected = pd.Series(np.array(
+        [0.,   25.173,  100.757,   31.121]),
+        index=irrad_data.index)
+    assert_series_equal(out, expected, check_less_precise=2)
+    assert_series_equal(out_Rb, expected, check_less_precise=2)
+
+
 def test_perez_driesse_airmass(irrad_data, ephem_data, dni_et):
     dni = irrad_data['dni'].copy()
     dni.iloc[2] = np.nan
@@ -443,7 +460,8 @@ def test_perez_driesse_scalar():
 
 
 @pytest.mark.parametrize('model', ['isotropic', 'klucher', 'haydavies',
-                                   'reindl', 'king', 'perez', 'perez-driesse'])
+                                   'reindl', 'king', 'perez', 'perez-driesse',
+                                   'muneer'])
 def test_sky_diffuse_zenith_close_to_90(model):
     # GH 432
     sky_diffuse = irradiance.get_sky_diffuse(
@@ -495,7 +513,8 @@ def test_campbell_norman():
 def test_get_total_irradiance(irrad_data, ephem_data, dni_et,
                               relative_airmass):
     models = ['isotropic', 'klucher',
-              'haydavies', 'reindl', 'king', 'perez', 'perez-driesse']
+              'haydavies', 'reindl', 'king', 'perez', 'perez-driesse',
+              'muneer']
 
     for model in models:
         total = irradiance.get_total_irradiance(
@@ -514,7 +533,8 @@ def test_get_total_irradiance(irrad_data, ephem_data, dni_et,
 
 @pytest.mark.parametrize('model', ['isotropic', 'klucher',
                                    'haydavies', 'reindl', 'king',
-                                   'perez', 'perez-driesse'])
+                                   'perez', 'perez-driesse',
+                                   'muneer'])
 def test_get_total_irradiance_albedo(
         irrad_data, ephem_data, dni_et, relative_airmass, model):
     albedo = pd.Series(0.2, index=ephem_data.index)
@@ -534,7 +554,8 @@ def test_get_total_irradiance_albedo(
 
 @pytest.mark.parametrize('model', ['isotropic', 'klucher',
                                    'haydavies', 'reindl', 'king',
-                                   'perez', 'perez-driesse'])
+                                   'perez', 'perez-driesse',
+                                   'muneer'])
 def test_get_total_irradiance_scalars(model):
     total = irradiance.get_total_irradiance(
         32, 180,