pycom · gijsio · Jan 22, 2021
diff --git a/content/datasheets/development/fipy.md b/content/datasheets/development/fipy.md
@@ -24,9 +24,7 @@ The datasheet of the FiPy is available as a [PDF File](/gitbook/assets/specsheet
 
 The drawing of the LTE-M antenna is available as a [PDF File](/gitbook/assets/lte-m-antenna-drawing.pdf).
 
-The Fipy is certified for [CE RED](/gitbook/assets/fipy_c03-b0-red-final.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dts.pdf) [FCC DXX](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dxx.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-tnb.pdf)
-[RCM](/gitbook/assets/RCM-FIPY.zip)
-[ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-FiPy(8217-00091P)-20190523.pdf)
+The Fipy is certified for [CE RED](/gitbook/assets/fipy_c03-b0-red-final.pdf), [FCC DSS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dts.pdf), [FCC DXX](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-dxx.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtfipy01r-fcc-grant-tnb.pdf), [RCM](/gitbook/assets/RCM-FIPY.zip), [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-FiPy(8217-00091P)-20190523.pdf)
 ## Pinout
 
 The pinout of the FiPy is available as a [PDF File](/gitbook/assets/fipy-pinout.pdf)
@@ -35,6 +33,11 @@ The pinout of the FiPy is available as a [PDF File](/gitbook/assets/fipy-pinout.
 
 > Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
 
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/FiPy.step)
+[Pycom footprints](https://github.com/pycom/footprints)
+
 ## Notes
 
 ### Power

diff --git a/content/datasheets/development/gpy.md b/content/datasheets/development/gpy.md
@@ -22,21 +22,21 @@ The datasheet of the GPy is available as a [PDF File](/gitbook/assets/specsheets
 
 The drawing of the LTE-M antenna is available as a [PDF File](/gitbook/assets/lte-m-antenna-drawing.pdf)
 
-The Gpy is certified for [CE RED](/gitbook/assets/c03-b0-red-gpy.pdf) and [FCC DSS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dts.pdf) [FCC TNB](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-tnb.pdf)
-
-[RCM](/gitbook/assets/RCM-GPy.zip)
-[ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-GPy(8217-00090P)-20190523.pdf)
-
+The Gpy is certified for [CE RED](/gitbook/assets/c03-b0-red-gpy.pdf), [FCC DSS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dss.pdf) [FCC DTS](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-dts.pdf), [FCC TNB](/gitbook/assets/pycom-2ajmtgpy01r-fcc-grant-tnb.pdf), [RCM](/gitbook/assets/RCM-GPy.zip), [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-GPy(8217-00090P)-20190523.pdf)
 
 ## Pinout
 
 The pinout of the GPy is available as a [PDF File](/gitbook/assets/gpy-pinout.pdf)
 
 ![](/gitbook/assets/gpy-pinout.png)
 
-{{% hint style="info" %}}
-Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
-{{% /hint %}}
+> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
+
+
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/GPy.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes
 

diff --git a/content/datasheets/development/lopy.md b/content/datasheets/development/lopy.md
@@ -33,6 +33,10 @@ The pinout of the LoPy is available as a [PDF File](/gitbook/assets/lopy-pinout.
 
 > Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
 
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/LoPy4.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes
 

diff --git a/content/datasheets/development/lopy4.md b/content/datasheets/development/lopy4.md
@@ -34,6 +34,10 @@ The pinout of the LoPy4 is available as a [PDF File](/gitbook/assets/lopy4-pinou
 
 
 > Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed in Software.
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/LoPy4.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes
 ### Power

diff --git a/content/datasheets/development/sipy.md b/content/datasheets/development/sipy.md
@@ -28,7 +28,12 @@ The pinout of the SiPy is available as a [PDF File](/gitbook/assets/sipy-pinout.
 
 ![](/gitbook/assets/sipy-pinout.png)
 
-> Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
+> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
+
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/SiPy.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes
 

diff --git a/content/datasheets/development/wipy2.md b/content/datasheets/development/wipy2.md
@@ -19,7 +19,7 @@ aliases:
 
 The datasheet of the WiPy2 is available as a [PDF File](/gitbook/assets/specsheets/Pycom_002_Specsheets_WiPy2.0_v2.pdf)
 
-The Wipy 2 is certified for [CE RED](/gitbook/assets/16-213297_expertise_pycom_wipy-2.0r.pdf) and [FCC ACC](/gitbook/assets/2091acc16_grant.pdf) [FCC BCC](/gitbook/assets/2091bcc16_grant.pdf)
+The Wipy 2 is certified for [CE RED](/gitbook/assets/16-213297_expertise_pycom_wipy-2.0r.pdf), [FCC ACC](/gitbook/assets/2091acc16_grant.pdf), [FCC BCC](/gitbook/assets/2091bcc16_grant.pdf)
 
 
 ## Pinout
@@ -28,7 +28,12 @@ The pinout of the WiPy2 is available as a [PDF File](/gitbook/assets/wipy2-pinou
 
 ![](/gitbook/assets/wipy2-pinout.png)
 
-> Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
+> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
+
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/WiPy.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes
 

diff --git a/content/datasheets/development/wipy3.md b/content/datasheets/development/wipy3.md
@@ -20,11 +20,7 @@ aliases:
 
 The datasheet of the WiPy3 is available as a [PDF File](/gitbook/assets/specsheets/Pycom_002_Specsheets_WiPy3.0_v2.pdf)
 
-The Wipy 3 is certified for [CE RED](/gitbook/assets/17-214126_red-certificate_pycom_wipy-3.0.pdf)
-
-[RCM](/gitbook/assets/RCM-Wipy3.pdf)
-
-[ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-WiPy-3(8286-00026P)-20190523.pdf)
+The Wipy 3 is certified for [CE RED](/gitbook/assets/17-214126_red-certificate_pycom_wipy-3.0.pdf), [RCM](/gitbook/assets/RCM-Wipy3.pdf), [ROHS certification](/gitbook/assets/RoHs_declarations/RoHS-for-WiPy-3(8286-00026P)-20190523.pdf)
 
 ## Pinout
 
@@ -33,8 +29,12 @@ The pinout of the WiPy3 is available as a [PDF File](/gitbook/assets/wipy3-pinou
 
 ![](/gitbook/assets/wipy3-pinout.png)
 
-> Please note that the PIN assignments for UART1 \(TX1/RX1\), SPI \(CLK, MOSI, MISO\) and I2C \(SDA, SCL\) are defaults and can be changed via software.
+> Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
 
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/WiPy.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Differences from WiPy 2.0
 
@@ -43,6 +43,7 @@ The pinout of the WiPy3 is available as a [PDF File](/gitbook/assets/wipy3-pinou
 * The External FLASH has been upgraded from 4MB to 8MB
 * The antenna select pin has moved from GPIO16 to GPIO21 \(P12\)
 
+
 ## Notes
 
 ### Power

diff --git a/content/datasheets/expansionboards/pyethernet.md b/content/datasheets/expansionboards/pyethernet.md
@@ -15,6 +15,10 @@ The PyEthernet is a module meant for the [Pygate](../pygate/) expansionboard, en
 
 We currently have no datasheet available for the module. On the bottom, near the pinheaders, you can find labels for the pin functions. The pins are used to connect both power and a SPI bus.
 
+## Footprints & 3D files
+
+[3D STEP file](/gitbook/assets/3D-files/PyEthernet.step)
+[Pycom footprints](https://github.com/pycom/footprints)
 
 ## Notes