This app let's you connect your Iungo to Homey. You can add your Iungo smart meters and connected devices. Once done it will show up in the flow-editor, ready to be used!
If you like this app, please consider to donate
If you have any suggestions or bugs, please post them on GitHub: https://github.com/robertraaijmakers/com.iungo/
v1.0.0:
- Completely rebuild app to be compatible with Homey v5. You might need to reconnect your devices. Sorry!
v0.4.0:
- Added support for Homey energy!! :)
v0.3.4:
- Added fix for homes without gas meter
- Added fix to support modbus energy meters as seperate energy meters
v0.3.3:
- Fixt synchronisation problem with redelivery values
- Added power fase readings (repair of device needed). This will show:
- Import per fase (shown when redelivery, or more then one fase is available)
- Export per fase (if in use)
- Total power import (shown when redelivery, or more then one fase is available)
- Total power export (if in use)
- Made sure that capabilities are only shown if they are used (e.g. redelivery readings won't show if you don't have redelivery power)
- Added solar meter
- Completely rewrote the app to use Homey SDK Version 2 (so it's future proof :)), needs Homey version 1.5 or higher
v0.2.8:
- Added redelivery (solar panels) capabilities to smart meter (repair of device needed)
- Added some setting options to the smart meter (tariff, gas meter interval)
- Fixt a defect that water meter offset value wasn't retrieved from Iungo
v0.2.7:
- Fix for reading water meter values
- Updated app store image according to Iungo standards
v0.2.3:
- Initial version of Iungo app letting you read your P1 meter with Iungo Lite or the Iungo Energy Controller
- Letting you manage your Iungo compatible wall sockets (read power consumption and turn them on and off from within Homey)