Merge pull request #29 from sched-ext/scx-6.9.5

v6.9.5-scx1

Documentation/devicetree/bindings/pci/rcar-pci-host.yaml

@@ -77,6 +77,9 @@ properties:
   vpcie12v-supply:
     description: The 12v regulator to use for PCIe.
 
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml

@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -198,7 +198,6 @@ allOf:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
-              - qcom,x1e80100-qmp-gen3x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -71,7 +71,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -127,6 +126,21 @@ allOf:
             - const: ref
             - const: qref
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml

@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -26,6 +23,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy

Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml

@@ -97,16 +97,18 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
                   const: eth
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +125,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -159,10 +162,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -178,11 +182,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -260,33 +265,34 @@ patternProperties:
           pins:
             description:
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 

Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml

@@ -72,40 +72,24 @@ $defs:
         description:
           Specify the alternative function to be configured for the specified
           pins.
-        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
-                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
-                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
-                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
-                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
-                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
-                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
-                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
-                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
-                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
-                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
-                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
-                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
-                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
-                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
-                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
-                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
-                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
-                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
-                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
-                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
-                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
-                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
-                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
-                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
-                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
-                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
-                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
-                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
-                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
-                vsense_trigger ]
+        enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+                cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+                coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+                ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+                gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+                jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+                pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+                qlink0_enable, qlink0_request, qlink0_wmss_reset,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+                qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+                tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+                vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+                wlan1_adc_dtest0, wlan1_adc_dtest1 ]
 
         required:
           - pins

Documentation/driver-api/fpga/fpga-bridge.rst

@@ -6,17 +6,20 @@ API to implement a new FPGA bridge
 
 * struct fpga_bridge - The FPGA Bridge structure
 * struct fpga_bridge_ops - Low level Bridge driver ops
-* fpga_bridge_register() - Create and register a bridge
+* __fpga_bridge_register() - Create and register a bridge
 * fpga_bridge_unregister() - Unregister a bridge
 
+The helper macro ``fpga_bridge_register()`` automatically sets
+the module that registers the FPGA bridge as the owner.
+
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
 
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge_ops
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
-   :functions: fpga_bridge_register
+   :functions: __fpga_bridge_register
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
    :functions: fpga_bridge_unregister

Documentation/driver-api/fpga/fpga-mgr.rst

@@ -24,7 +24,8 @@ How to support a new FPGA device
 --------------------------------
 
 To add another FPGA manager, write a driver that implements a set of ops.  The
-probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
+probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``,
+such as::
 
 	static const struct fpga_manager_ops socfpga_fpga_ops = {
 		.write_init = socfpga_fpga_ops_configure_init,
@@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
 	}
 
 Alternatively, the probe function could call one of the resource managed
-register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full().
-When these functions are used, the parameter syntax is the same, but the call
-to fpga_mgr_unregister() should be removed. In the above example, the
-socfpga_fpga_remove() function would not be required.
+register functions, ``devm_fpga_mgr_register()`` or
+``devm_fpga_mgr_register_full()``.  When these functions are used, the
+parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be
+removed. In the above example, the ``socfpga_fpga_remove()`` function would not be
+required.
 
 The ops will implement whatever device specific register writes are needed to
 do the programming sequence for this particular FPGA.  These ops return 0 for
@@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver
 * struct fpga_manager -  the FPGA manager struct
 * struct fpga_manager_ops -  Low level FPGA manager driver ops
 * struct fpga_manager_info -  Parameter structure for fpga_mgr_register_full()
-* fpga_mgr_register_full() -  Create and register an FPGA manager using the
+* __fpga_mgr_register_full() -  Create and register an FPGA manager using the
   fpga_mgr_info structure to provide the full flexibility of options
-* fpga_mgr_register() -  Create and register an FPGA manager using standard
+* __fpga_mgr_register() -  Create and register an FPGA manager using standard
   arguments
-* devm_fpga_mgr_register_full() -  Resource managed version of
-  fpga_mgr_register_full()
-* devm_fpga_mgr_register() -  Resource managed version of fpga_mgr_register()
+* __devm_fpga_mgr_register_full() -  Resource managed version of
+  __fpga_mgr_register_full()
+* __devm_fpga_mgr_register() -  Resource managed version of __fpga_mgr_register()
 * fpga_mgr_unregister() -  Unregister an FPGA manager
 
+Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``,
+``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available
+to ease the registration.
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
 
@@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver
    :functions: fpga_manager_info
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register_full
+   :functions: __fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register
+   :functions: __fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register_full
+   :functions: __devm_fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register
+   :functions: __devm_fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
    :functions: fpga_mgr_unregister

Documentation/driver-api/fpga/fpga-region.rst

@@ -46,13 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* struct fpga_region_info - Parameter structure for fpga_region_register_full()
-* fpga_region_register_full() -  Create and register an FPGA region using the
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
   fpga_region_info structure to provide the full flexibility of options
-* fpga_region_register() -  Create and register an FPGA region using standard
+* __fpga_region_register() -  Create and register an FPGA region using standard
   arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list.
    :functions: fpga_region_info
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register_full
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister