Simple Ethernet library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W5100S, W6100. With this library you can use the Arduino Ethernet (shield or board) to connect to Internet to provides both Client and server functionalities.

"polylab" Microchip AVR Dx32-Series Development-Board

Arduino code for interfacing with DS18B20 temperature sensor for DxCore platform.

Arduino Scripts for interfacing with PCF85063AT Real-Time Clock and calendar. Tested on AVR64DA28. Should work on any Arduino board.

This library enables you to use Interrupt from Hardware Timers on Arduino AVRDx-based boards (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore. These AVRDx Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software tim…

This library enables you to use ISR-based PWM channels on Arduino AVRDx-based boards (AVR128Dx, AVR64Dx, AVR32Dx, etc.), using DxCore, to create and output PWM any GPIO pin. It now supports up to 64 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most importa…

This library enables you to use Hardware-based PWM channels on Arduino AVRDx-based boards (AVR128Dx, AVR64Dx, AVR32Dx, etc.), using DxCore, to create and output PWM. Using similar functions as many other FastPWM libraries, it enables you to port PWM code easily between platforms.