Raspberry Pi Zero / WebIOPi - based Garage Door Opener
= Initial project idea = http://www.driscocity.com/idiots-guide-to-a-raspberry-pi-garage-door-opener/
= Updated Two Door with Open Alerts https://github.com/jchan1234/Garage-Door-Opener-Raspberry-Pi/blob/master/README.md
= Alternate project = http://itsbrent.net/2013/03/hacking-my-garage-with-a-raspberry-pi/
= WebIOPi patch for new-gen (40pin) = https://github.com/thortex/rpi3-webiopi
= Experimental Apple Siri integration = http://devpost.com/software/homekit-garage-door-opener
= Possible Notifications options = http://www.richlynch.com/2013/07/27/pi_garage_alert_1/
= Other Attempts to update WebIOPi = https://www.raspberrypi.org/forums/viewtopic.php?f=32&t=8429&start=25
https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98981 } {look for comments by danjperron » Wed Jan 06, 2016 8:22 pm}
-
Raspberry Pi Zero 1.3 (RPZ)
-
Zero Case
-
Wi-Fi USB dongle { Not required for Raspberry Pi 3 } -- micro-USB adapter {cable-less adapter}
-
Micro-USB Charger
-
Micro SD Card
-
One 2x20-Pin header box or five-six 1-Pin headers { Only required Raspberry Pi Zero }
-
micro-USB (male) to USB (female) cable adapter { Used for hub during initial setup; } { Can be used for wifi during final installation instead of cable-less adapter }
-
USB Hub { At least 2 ports, used during intial setup for wifi and keyboard/mouse }
-
mini-HDMI to HDMI adapter { For initial setup; Can SSH or VNC after initial setup } { Only required for Raspberry Pi Zero, all others have full HDMI }
-
Relay switch
-
Female-to-Female Jumper Wires
-
Male-to-Female Jumper wires
-
Wire Nuts
-
2-conductor cable ~20-24 gauge wire (CAT6 cable works good)
-
Magnetic Switch {optional}
-
1 10k Ohm resistor {required for magnetic switch}
-
1 1k Ohm resistor {required for magnetic switch}