v0.4.18

v0.4.18

• Finally found a Solution for the second Prelim LS on Final!
• Cargo-Changes are now applied incrementally (5%/s) over Time
• Added Option to skip Walkaround in 2024 (disabled by Default, Check Tooltip)
• Improved Session-Ready-Detection on 2024 (Slightly, as the SDK allows - Asobo has no Interest in improving a Situation that exists since 2020 🤷‍♂️)
• Added Pause-Handling
• The Fenix native Integration is now automatically disabled
• Fixed Installer using wrong .NET Runtime on new Installs / Updates
• CEF is no longer used
  • Makes the Fenix2GSX Binary much smaller now
  • No strange Cases anymore of Fenix2GSX crashing when the Final LS is send
• Reworked SeatMap Handling (something you shouldn't notice ^^)
• The GSX Settings "Auto Mode" and and "Detect custom ..." are now automatically set (to disabled)
• Added Command in Systray and Button in UI labeled "Get Logs" to open the Log Directory
• Updated SDK

v0.4.17

Support for the MSFS2024 Public Beta and FSUIPC 7.5.0 added!

NOTE:
❗ Due to Sim / Aircraft Limitations, do not use Walkaround Mode when Doors need to be opened or closed. Besides that, it should be fine to do the Walkaround while Services are running.
❗ Due to the Public Beta State of 2024, the Mobiflight Module sometimes goes "INOP" and Fenix2GSX won't connect ("Out of Bounds" Error Messages in the Log). Sometimes it helps to remove the Mobiflight Module, rerun the Fenix2GSX Installer and restart the PC.

v0.4.16

ATTENTION: When the App is started for the first Time after this Update, the Settings for "Answer Tug Question" and "Automatically call Pushback when Tug is already connected" will be resetted. You need to configure both Settings to you Preference again.

• Added Warning Message that answering the Tug Question with 'Yes' and having an automatic Pushback Call can lead to unexpected Removal Ground Equipment
• This Warning Message is only displayed once
• Overriding the Progressive Refuel GSX Setting set by Fenix - solving the Issue that the Fuel-Truck won't leave when a higher than default Refuel Rate is used
• Upped Minimum .NET Version to 8.0.10
• Updated Libraries

v0.4.15

• Workarounds for new GSX Feature (Tug while Boarding)
• Automated Answer of the Tug Question (no manual Selection possible!)
  • Btw these two Changes should fix Issues with Boarding with GSX 3.1.8 and above
• Option to automatically start Pushback after Boarding when Tug was already connected (enabled by default - so get your Airplane ready! 😂 )
• Hidden/Advanced Options to disable Door-Synch (does not apply to remove Stairs after Boarding and Close Doors on Final)
• Hidden/Advanced Option to forcefully restart Couatl on Arrival now waits until the GS is below 30-ish Knots

v0.4.14

• Fixed Refueling being interrupted when Boarding is called through INT/RAD
• Workaround Doors not opening on certain Stands (e.g. Walk-In) - GSX Bug which presumably gets ignored
• Changed Restart of GSX on Arrival - it now waits until the GS is below 30-ish Knots (only available in Config-File - off by default)
• Workaround for Fenix Bug publishing empty OFP Data - like for Example planned Fuel is reported as zero
  • Very likely the Cause for previous Issues with Refueling being skipped because FOB is higher than planned
  • Fenix2GSX will not import/accept the OFP when planned Fuel is reported as zero
  • If that is the Case for more than 20s it will trigger an EFB Reset for a new Attempt
• Changed Call for Boarding so that it is retried if the Boarding Service isn't active
• Fixed Bug that entering Drone/Show-Case Cam caused Fenix2GSX to restart the Service Loop

v0.4.13

• Fixed L2 Door Handling - won't open with the new Default Profile (but can still be used if configured in the AC Profile)
• Improved Door-Handling for Stairs-only to only open when all Stairs stop operating
• Overwrite Tankering Support in User-Settings to work-around false-detections
• Fixed single Occurrence of 'Exception during Update()'
• Removed MF Call to set Max-LVars-per-Frame

v0.4.12

• Compatibility for A319 & A321
• Workaround for MSFS deciding to use L2 Door on the A321 (it still connects there, but Boarding works without leaving L1 open)
• Fixed incorrect rounding on LBS Fuel Values
• Round up to nearest 100 for Fuel is now an advanced Option in the Config File

v0.4.11

• Fixed Fenix2GSX "hanging" or "stuck" on Startup when it receives empty Data from the EFB/Fenix
• Changed Chocks/Cones and GPU Behaviour on Arrival - will be placed before the Delay ended when Jetway/Stairs are already connected
• Fixed the Left Rear Door (L2) not being opened on Arrival (on Jetway Stands with Stair attached)
• The Cabin Call (for Take-Off) is now correctly answered (that is the RESET Button will now be pressed)
• Slightly changed Timings on the Cargo Doors
• Hidden/Advanced Setting to keep GPU connected until disconnected (so even when Ground-Equipment-Removal was triggered)
• HttpClient now ignores Proxy-Settings and enforces Time-Out after 15s
• Updated SDK & Libraries
• Added/Changed some Log-Messages on Exceptions and Verbose Mode
• Fixed Installer not detecting Major Version Updates
• Moved to .NET 8
• Fixed App Crash when triggering Final LS (when that happens on your System: change 'setCefRootPath' to true in your config File)

v0.4.10

• Fixed: Compatibility to 2.0.0.407 (NOTE This Version is incompatible to previous Fenix Versions!)
• Fixed/Added: OFPs with 0 Passenger supported
• Added: Advanced Config File Parameter to disable GPU/Chock Interception

v0.4.9

• Fixed: Issues with the second (and consecutive) Turn-Arounds (directly switching to Departure State although no new OFP was imported)
• Fixed: Deboarding not working correctly (because Passenger Delta was negative)
• Added: "Ding" Sound on Turn-Around when EFB was reset (to signal that a new OFP can now be imported)
• Changed: Door-Handling in such a Way that manually operating the Doors is possible (if applicable)