update log backup user docs

en/backup-restore-cr.md

@@ -36,6 +36,13 @@ This section introduces the fields in the `Backup` CR.
     * `volume-snapshot`: back up data by volume snapshots.
     * `log`: back up log data in real time in the KV layer.
 
+* `.spec.logSubcommand`: the subcommand for controlling the log backup status in the Backup CR. This field provides three options for managing a log backup task:
+    * `log-start`: initiates a new log backup task or resumes a paused task. Use this command to start the log backup process or resume a task from a paused state.
+    * `log-pause`: temporarily pauses the currently running log backup task. After pausing, you can use the `log-start` command to resume the task.
+    * `log-stop`: permanently stops the log backup task. After executing this command, the Backup CR enters a stopped state and cannot be restarted.
+
+  For versions before v1.5.5, use the `logStop` field with boolean values (`true`/`false`) to control log backup operations. While `logStop` is still supported in v1.5.5 and v1.6.1, it is recommended to use `logSubcommand` instead.
+
 * `.spec.restoreMode`: the restore mode. The default value is `snapshot`, which means restoring data from snapshots in the KV layer. This field is valid only for restore and has three value options currently:
     * `snapshot`: restore data from snapshots in the KV layer.
     * `volume-snapshot`: restore data from volume snapshots.

en/backup-restore-overview.md

@@ -78,6 +78,8 @@ kubectl delete backupschedule ${name} -n ${namespace}
 
 If you use TiDB Operator v1.1.2 or an earlier version, or if you use TiDB Operator v1.1.3 or a later version and set the value of `spec.cleanPolicy` to `Delete`, TiDB Operator cleans the backup data when it deletes the CR.
 
+If you use v1.5.5, v1.6.1, or a later version, TiDB Operator automatically attempts to stop running log backup tasks when you delete the Custom Resource (CR). This automatic stop feature only applies to log backup tasks that are running normally and does not handle tasks in an error or failed state.
+
 If you back up cluster data using AWS EBS volume snapshots and set the value of `spec.cleanPolicy` to `Delete`, TiDB Operator deletes the CR, and cleans up the backup file and the volume snapshots on AWS.
 
 In such cases, if you need to delete the namespace, it is recommended that you first delete all the `Backup`/`BackupSchedule` CRs and then delete the namespace.

en/backup-to-aws-s3-using-br.md

@@ -228,6 +228,26 @@ demo1-full-backup-s3   full   snapshot   Complete   s3://my-bucket/my-full-backu
 
 You can use a `Backup` CR to describe the start and stop of a log backup task and manage the log backup data. Log backup grants permissions to remote storages in the same way as snapshot backup. In this section, the example shows log backup operations by taking a `Backup` CR named `demo1-log-backup-s3` as an example. Note that these operations assume that permissions to remote storages are granted using accessKey and secretKey. See the following detailed steps.
 
+#### Description of the `logSubcommand` field
+
+In the Backup Custom Resource (CR), you can use the `logSubcommand` field to control the state of a log backup task. The `logSubcommand` field supports the following commands:
+
+- `log-start`: initiates a new log backup task or resumes a paused task. Use this command to start the log backup process or resume a task from a paused state.
+
+- `log-pause`: temporarily pauses the currently running log backup task. After pausing, you can use the `log-start` command to resume the task.
+
+- `log-stop`: permanently stops the log backup task. After executing this command, the Backup CR enters a stopped state and cannot be restarted.
+
+These commands provide fine-grained control over the lifecycle of log backup tasks, enabling you to start, pause, resume, and stop tasks effectively to manage log data retention in Kubernetes environments.
+
+<Tip>
+
+In TiDB Operator v1.5.4, v1.6.0, and earlier versions, you can use the `logStop: true/false` field to stop or start log backup tasks. This field is retained for backward compatibility.  
+
+However, do not use `logStop` and `logSubcommand` fields in the same Backup CR, as this is not supported. For TiDB Operator v1.5.5, v1.6.1, and later versions, it is recommended to use the `logSubcommand` field to ensure clear and consistent configuration.
+
+</Tip>
+
 #### Start log backup
 
 1. In the `backup-test` namespace, create a `Backup` CR named `demo1-log-backup-s3`.
@@ -247,6 +267,7 @@ You can use a `Backup` CR to describe the start and stop of a log backup task an
       namespace: backup-test
     spec:
       backupMode: log
+      logSubcommand: log-start
       br:
         cluster: demo1
         clusterNamespace: test1
@@ -308,15 +329,105 @@ Conditions:
 Log Checkpoint Ts:       436569119308644661
 ```
 
+#### Pause log backup
+
+You can pause a log backup task by setting the `logSubcommand` field of the Backup Custom Resource (CR) to `log-pause`. The following example shows how to pause the `demo1-log-backup-s3` CR created in [Start log backup](#start-log-backup).
+
+```shell
+kubectl edit backup demo1-log-backup-s3 -n backup-test
+```
+
+To pause the log backup task, change the value of `logSubcommand` from `log-start` to `log-pause`, then save and exit the editor. The modified content is as follows:
+
+```yaml
+---
+apiVersion: pingcap.com/v1alpha1
+kind: Backup
+metadata:
+  name: demo1-log-backup-s3
+  namespace: backup-test
+spec:
+  backupMode: log
+  logSubcommand: log-pause
+  br:
+    cluster: demo1
+    clusterNamespace: test1
+    sendCredToTikv: true
+  s3:
+    provider: aws
+    secretName: s3-secret
+    region: us-west-1
+    bucket: my-bucket
+    prefix: my-log-backup-folder
+```
+
+You can verify that the `STATUS` of the `demo1-log-backup-s3` Backup CR changes from `Running` to `Pause`:
+
+```shell
+kubectl get backup -n backup-test
+```
+
+```
+NAME                       MODE     STATUS    ....
+demo1-log-backup-s3        log      Pause     ....
+```
+
+#### Resume log backup
+
+If a log backup task is paused, you can resume it by setting the `logSubcommand` field to `log-start`. The following example shows how to resume the `demo1-log-backup-s3` CR that was paused in [Pause Log Backup](#pause-log-backup).
+
+> **Note:**
+> 
+> This operation applies only to tasks in the `Pause` state. You cannot resume tasks in the `Fail` or `Stopped` state.
+
+```shell
+kubectl edit backup demo1-log-backup-s3 -n backup-test
+```
+
+To resume the log backup task, change the value of `logSubcommand` from `log-pause` to `log-start`, then save and exit the editor. The modified content is as follows:
+
+```yaml
+---
+apiVersion: pingcap.com/v1alpha1
+kind: Backup
+metadata:
+  name: demo1-log-backup-s3
+  namespace: backup-test
+spec:
+  backupMode: log
+  logSubcommand: log-start
+  br:
+    cluster: demo1
+    clusterNamespace: test1
+    sendCredToTikv: true
+  s3:
+    provider: aws
+    secretName: s3-secret
+    region: us-west-1
+    bucket: my-bucket
+    prefix: my-log-backup-folder
+```
+
+You can verify that the `STATUS` of the `demo1-log-backup-s3` Backup CR changes from `Pause` to `Running`:
+
+```shell
+kubectl get backup -n backup-test
+```
+
+```
+NAME                       MODE     STATUS    ....
+demo1-log-backup-s3        log      Running   ....
+```
+
 #### Stop log backup
 
-Because you already created a `Backup` CR named `demo1-log-backup-s3` when you started log backup, you can stop the log backup by modifying the same `Backup` CR. The priority of all operations is: stop log backup > delete log backup data > start log backup.
+You can stop a log backup task by setting the `logSubcommand` field of the Backup Custom Resource (CR) to `log-stop`. The following example shows how to stop the `demo1-log-backup-s3` CR created in [Start log backup](#start-log-backup).
 
 ```shell
 kubectl edit backup demo1-log-backup-s3 -n backup-test
 ```
 
-In the last line of the CR, append `spec.logStop: true`. Then save and quit the editor. The modified content is as follows:
+Change the value of `logSubcommand` to `log-stop`, then save and exit the editor. The modified content is as follows:
 
 ```yaml
 ---
@@ -327,6 +438,7 @@ metadata:
   namespace: backup-test
 spec:
   backupMode: log
+  logSubcommand: log-stop
   br:
     cluster: demo1
     clusterNamespace: test1
@@ -337,10 +449,9 @@ spec:
     region: us-west-1
     bucket: my-bucket
     prefix: my-log-backup-folder
-  logStop: true
 ```
 
-You can see the `STATUS` of the `Backup` CR named `demo1-log-backup-s3` change from `Running` to `Stopped`:
+You can verify that the `STATUS` of the `Backup` CR named `demo1-log-backup-s3` changes from `Running` to `Stopped`:
 
 ```shell
 kubectl get backup -n backup-test
@@ -352,12 +463,16 @@ demo1-log-backup-s3        log      Stopped   ....
 ```
 
 <Tip>
-You can also stop log backup by taking the same steps as in [Start log backup](#start-log-backup). The existing `Backup` CR will be updated.
+
+`Stopped` is the terminal state for log backup. In this state, you cannot change the backup state again, but you can still clean up the log backup data.
+
+In TiDB Operator v1.5.4, v1.6.0, and earlier versions, you can use the `logStop: true/false` field to stop or start log backup tasks. This field is retained for backward compatibility.
+
 </Tip>
 
 #### Clean log backup data
 
-1. Because you already created a `Backup` CR named `demo1-log-backup-s3` when you started log backup, you can clean the log data backup by modifying the same `Backup` CR. The priority of all operations is: stop log backup > delete log backup data > start log backup. The following example shows how to clean log backup data generated before 2022-10-10T15:21:00+08:00.
+1. Because you already created a `Backup` CR named `demo1-log-backup-s3` when you started log backup, you can clean the log data backup by modifying the same `Backup` CR. The following example shows how to clean log backup data generated before 2022-10-10T15:21:00+08:00.
 
     ```shell
     kubectl edit backup demo1-log-backup-s3 -n backup-test
@@ -374,6 +489,7 @@ You can also stop log backup by taking the same steps as in [Start log backup](#
       namespace: backup-test
     spec:
       backupMode: log
+      logSubcommand: log-start/log-pause/log-stop
       br:
         cluster: demo1
         clusterNamespace: test1